Hitachi L37X01AU, L42X01AU manual TV Setup Operation PC Adjustment Setting, From Setup Menu RGB

TV SETUP OPERATION (continued)

PC Adjustment Setting

You can adjust the display condition such as position adjustment and color setting while connecting to the PC and being

RGB mode. See 18 for the PC connection.

From Setup Menu (RGB)

1.Press button.

2.Select “ Setup” menu and press button.

3.Select the preferred menu item and press button.

Setup
Auto Adjust		Ź
Image Position		Ź
Horizontal Clock		+4
Clock Phase		21
Reset		Reset
Frequency Display		Off
WXGA		Off
Select	Return		Exit

Selected Items			Setup hint
	Adjust Horizontal Position, Vertical Position, Horizontal
	Clock, and Clock Phase automatically.
Auto Adjust	• Press	or	button to start auto adjustment as needed.
	The message “Auto Adjust” is displayed.

•Depending on the type of the signal, there is a possibility that the display may not be adjusted in its optimum condition with this function. In that case, please adjust each item manually.

		• Press	button and	button to adjust the horizontal
Image Position*		and vertical display positions.
		(For example: When user connect PC terminal to LCD TV set.
		PC Display card provide timing is 1024x768 60Hz that
		Horizontal range: -100~+100 and Vertical range: -22~+22.)
Horizontal Clock*	-31~+31	Minimize the vertical stripes on the screen.
		Minimize the blurring of the letters and stripes on horizontal
Clock Phase*	0~+63	row.
		• Make sure to adjust Horizontal Clock first before adjusting
		Clock Phase.
Reset		Each item on this menu screen can be restored to the
		original factory settings by pressing			button.
Frequency Display	Off	Select whether indicating the PC signal frequency information
	On	on Input Signal Screen Display or not.
	Off
		• This function is available only for WXGA signal.
WXGA	1280x768
		• Refer to “Recommended Signal List” on 58 .
	1360x768

Information

The setting of the items indicated by “ *” can be automatically stored depending on the signal mode.

35