Hitachi L37X01AU, L42X01AU manual Table Mix-and -Match of the Input Modes

FUNCTION (continued)

Multi Picture Mode(continued)

Activate the Multi Picture Mode in Video Mode

To activate Multi Picture mode in either TV, AV, HDMI, and RGB mode, press on the remote control.

2-picture mode

You can watch two different pictures side by side.

This mode is available in both TV mode and AV mode ( AV1~4 Input).

Control on the side with Speaker Icon

Audio is output from the selected picture with the speaker icon. You can switch the Input modes ( DTT/TV and AV1~4) or change Channels only on the side with Speaker icon.

1.To shift the speaker icon , press button.

ƔThe speaker icon will be displayed in front of the Input mode indication.

2.To change the channel of the Sub-screen.

ƔMake sure that mark is located on the Sub-screen.

ƔPress to select channels.

3.To change the Input mode of the Sub-screen.

ƔMake sure that the speaker icon is located next to the Input mode indication of the Sub-screen (Upper).

ƔPress Input Select buttons on the remote control. (DTT/TV, AV3~4, and HDMI 1~3 are available)

4.To exit from the Multi Picture mode, press button.

NOTE

ƔYou cannot select input on both sides simultaneously.

ƔYou cannot select the same AV input on both sides simultaneously.

ƔThe message “ Not Available” will be appeared on the screen when the combinations of the Input modes are not acceptable.

(See the Table below for details.)

The selected picture with speaker icon

5	AV3
A	B
Main-Screen	Sub-Screen

Table: Mix-and –Match of the Input Modes

Main	Sub	DTT	TV	AV3	AV4	HDMI1	HDMI2	HDMI3
DTT		-	O	O	O	O	O	O
TV		O	-	O	O	O	O	O
AV1		O	O	O	O	O	O	O
AV2		O	O	O	O	O	O	O
AV3		O	O	-	O	O	O	O
AV4		O	O	O	-	O	O	O

(O: Available)

49