Hitachi L37X01U Connecting the plug into the wall socket, Information How to secure the cables

CONNECTION (continued)

Connecting Procedure (continued)

4. Connecting the plug into the wall socket

Connect the Power Cord after completing all other connections. (The type of plug is different from this drawing for some countries.)

UK only

Except UK

CAUTION

Use only the Power Cord provided.

Do not use a power supply voltage other than that indicated (AC220-240V, 50Hz). It may cause fi re or electric shock.

For the LCD television, a three-core power cord with a ground terminal is used for effi ciency protection. Always be sure to connect the Power Cord to a grounded outlet and make sure that the cord is properly grounded. If you use a power source converter plug, use an outlet with a ground terminal and screw down the ground line.

Connection to a Cable Distribution System is to be provided through a galvanic isolator.

Ensure that both ends of power cord are easily accessible.

If you have to change the power cord, please use the certifi ed power cord that meets your region’s safety standard.

Information

How to secure the cables.

After connecting all of the cables to the terminals, secure them with the clamps.

When you secure the cables, please be careful not to tighten too much.

How to secure the clamp:

To set

Clamp

To unfasten

Knob

Push the clump in the direction of the arrow until it clicks.

Whilst pushing the knob, pull it in the direction of the arrow.

22

Downloaded From TV-Manual.com Manuals