FEATURES (continued)
Power Swivel
With the Desktop stand, you can adjust the angle of the panel side to side by pressing 
control.
1.Press 
button on the remote control.
The Swivel Display (as shown in the fi gure on the right) will appear on the screen.
2.Adjust the angle of the panel with ◄► button whilst Swivel Display is on the screen. The unit will be able to rotate ±30 degrees to each side.
button on the remote
Swivel button
CAUTION
When you use the Power Swivel function, make sure that the Power Cord, cord or chain connected to the wall is loose enough to operate the Swivel function securely.
Do not put hands or face near the unit whilst operating the Swivel. It could cause personal injury. Beware especially when small children are around the unit.
NOTE
•If the stand cable is not connected to the unit, the message “Not Available” will appear on the screen.
•The Swivel Display will automatically disappear when no operation has been made for a few seconds.
Swivel 
The Swivel Display
Slack
30°
30°
CAUTION
•Do not push the panel with your hands whilst operating the Swivel. It could damage the panel and/or stand.
•Do not allow children to play or hang on the TV. These actions may tip it over, causing personal injury.
•Do not swing the unit back and forth.
•Do not place any fragile objects around the unit. The unit would hit the object(s) during the Swivel operation and could cause the breakage of the objects and/or the stand.
•To operate the Swivel function correctly, place the unit on the stable surface.
•When you use the unit as
Information
About Swivel terminal connection
• To connect the Desktop stand to the unit.
Connect the designated stand cable to the Swivel terminal on the rear side of the unit.
• To disconnect the stand from the unit.
Before detaching the stand from the unit, make sure to disconnect the stand cable from the Swivel terminal on the rear side of the unit.
CAUTION
• Turn Off the Main Power of the unit when connecting or disconnecting the stand cable to the unit.
70
Downloaded From