FEATURES (continued)
Audio Switching
NICAM / Sound Multiplex (including A2) (TV mode)
You can make optimum use of available audio by pressing I/II button of remote control. Audio can be switched only if receiving NICAM and sound multiplex signals; otherwise, pressing this button will have no effect, such as when only mono sound is received.
These can be divided into two main categories: Bilingual/Dual Sound broadcast and Stereo broadcast.
Bilingual/Dual Sound broadcast
Bilingual broadcast is the broadcast available on the main and sub languages, whilst dual sound broadcast is available on the primary and secondary sounds; for example, some sports programmes contain broadcast commentary on a game as primary sound, and a commentary about a team as the secondary.
When bilingual programme is received, sound mode display appears in yellow as shown. Also, when receiving NICAM signals, NICAM display will appear.
Each time I/II button is pressed, the display is switched in the sequence of following.
Sound multiplex signal received
Audio | [ | ] | Audio | [ | ] | Audio |
|
| Yellow |
|
| Yellow | Green |
NICAM signal received
Audio | NICAM[ ] | Audio | NICAM[ ] | Audio |
| Yellow |
| Yellow | Green |
[I]…Main language/Primary Sound
[II]...Sub language/Secondary Sound
ź…force mono: This selects main language or primary sound.
ENGLISH
Stereo broadcast
With stereo broadcast, you can enjoy different sound from either side.
When a stereo programme is received, sound mode display appears in red as shown. NICAM display will appear.
Press I/II button to switch between stereo and mono sound.
Sound multiplex signal received
Audio | Audio |
Red | Green |
NICAM signal received
...Stereo
ź....Force Mono
Audio | NICAM | Audio |
| Red | Green |
NOTE
•Please select ź(force mono) in case of poor reception, noise, poor stereo sound due to signal condition so that you can receive a clear mono sound.
•V represents the Mono broadcast.
71
Downloaded From