Hitachi L37X01U, L37X01E Features Multi Picture Mode, Activate in DTT/TV/AV1~5/HDMI1~3 mode

FEATURES (continued)

Multi Picture Mode

Activate in DTT/TV/AV1~5/HDMI1~3 mode

With this feature, you can watch different channels simultaneously on one screen. There are two modes (Split and PinP) in Multi-Picture mode.

1.To activate Multi Picture mode, press button on the remote control. Audio is output from the selected picture with the yellow frame.

You can switch the Input modes (DTT, TV, AV1~5, and HDMI1~3) or change channels only on the picture with a yellow frame.

2.To change the selected picture, press ◄► button.

The yellow frame is shifted from A to B back-and-forth.

3. To change the channel of the selected picture, press button.

4.To change the input mode of the selected picture, press button on the remote control.

NOTE

In TV mode, you cannot select the same channels on both sides simultaneously.

You cannot select the same AV input on both sides simultaneously. You cannot select HDMI input on both sides.

5.Only when the 1080i or 1080p signal is received on the left screen

(Main-screen), PinP mode is available.

To switch to PinP mode, press button. Each time button is pressed, the picture mode is changed as below.

2-Picture (Split) 2-Picture (PinP)

To change the selected picture, press ◄► button.

When the selected picture is the small screen (Sub-screen) in PinP mode, the frame of the sub-screen is shown in yellow.

When the selected picture is the large screen (Main-screen) in PinP mode, there is no yellow frame shown on Main-screen.

To change the position of the sub-screen in PinP mode, press button.

The position is changed as shown in the fi gure on the right.

6.To exit from the Multi Picture mode, press or button.

Whenever you press button to activate the Multi Picture mode, it starts from Split mode.

[Split]

5 TV AV1 AV

A B

[PinP]

(Main-screen)

(Sub-

screen)

62

Downloaded From TV-Manual.com Manuals