Hitachi P50V701 important safety instructions Set

First time use

Connecting External Video Sources

Your HITACHI Plasma Television is equipped with an AV Net feature. This feature helps to control your external Audio/Video equipment (VCR, Set Top Box, DVD, etc.). Once this is setup, it allows your IR Blaster cable to control your equipment using your HITACHI Plasma TV Remote Control. You can use your HITACHI remote control to control the Audio/Video equipment command without the equipment’s remote

control.

The Plasma Television Rear Panel has 2 IR Out jacks. Each IR Blaster cable can connect up to 2

external Audio/Video components. Therefore, you can connect the Plasma Television with up to four components. Please see the following example of an AV Net setup between your Hitachi Plasma Television and external Audio/Video equipment (VCR and DVD Player).

CONNECTING EXTERNAL AUDIO/VIDEO COMPONENTS TO IR OUT FOR AV NET

1.Connect your external Audio/Video components to the Rear Panel shown below.

2.Connect the IR Blaster cable to the IR OUT terminal of the Rear Panel.

3.Place the IR Blaster in front of the infrared sensor of the external components you wish to control.

			OUTPUT
		Y	PB/CB PR/CR R L
V	L	R
	OUTPUT
Infrared		Infrared
		Sensor
Sensor
			DVD
VCR
IR
Blaster

4.ACCESS THE AV NET SETUP WIZARD Press the MENU button.

5.Use the CURSOR PAD ￿ to highlight SETUP.

6.Press the SELECT or CURSOR PAD ￿ button to select.

7.Use the CURSOR PAD ￿ to highlight the

SET	AV NET feature then press the
button.

8.Follow the Setup procedure on pages 67-74.

Video

Audio

TV Guide On Screen

Channel Manager

Locks

Timers

Setup

Power Swivel

Move SEL Select

Setup

Set the Menu Options

Set The Screen Saver

Set The Inputs

Set The AV NET

Set The Closed Captions

Set The IR Out

Select The Quick Start Option

Reset the Software

Move SEL Return

NOTE: 1. The Rear Panel has two IR OUT terminals which can control up to a total of four external components.

2.The IR Blaster must be placed in front of the external components infrared sensor for the AV Net to work. Double-sided mounting tape may be used to hold the IR Blaster in place.

3.The correct codes must be chosen for each of the Audio/Video components for the AV Net to function properly.

24