TV Guide On Screen
Screen 11:
Are the settings correct ?
If Yes the TV Guide On ScreenTM setup is complete, then press SELECT button to continue.
If No please make the necessary changes in order to complete the TV Guide On ScreenTM setup procedure.
Screen 12:
This shows that the setup procedure is complete Use the CURSOR PAD and to highlight Next or if you are like to make changes select Back ; Then press SELECT button to continue or finish.
Screen 13:
When a CODE for a VCR is not accepted then the following message will appear. Check the setup as mentioned then select Next.
Screen 14:
None of the Hitachi codes appeared to control your VCR. What would you like to do now ?
1.- Try VCR configuration again to repeat the setup.
2.- Try alternate remote codes to see other code alternatives that may solve the problem.
3.- Skip this step, will finish the TV Guide On ScreenTM setup; but will show an incomplete setup for your VCR.
NOTE: 1. The Plasma TV should be in standby mode in order to continually receive updated program listings.
For using and navigating the TV Guide On ScreenTM System please refer to the included TV Guide On Screen User Manual.
54