Setup
After the CableCARD has been successfully installed, you can access CableCARD Information menu in the SETUP menu of the
Follow the instructions below to access the CableCARD Information menu.
1.Press the MENU button on the Remote Control to access the Main Menu screen.
2.Use the CURSOR PAD to highlight SETUP in the Main Menu and press the SELECT button.
3. Use the CURSOR PAD to highlight CableCARD Information and press the SELECT button.
OR
4.To view the CableCARD ID and Host ID, use the CURSOR PAD to highlight CableCARD Info and press the SELECT button.
NOTE: The Diagnostics Info. window is for
Service use only.
THINGS TO CHECK WHEN USING THE
CableCARD / CableCARD Services
1.Check that the CableCARD is properly inserted in
the CableCARD slot.
OR
2. Remove the CableCARD by pulling the CableCARD straight out.
3.Visually inspect the CableCARD to ensure all pin- holes are in good condition, with none blocked or damaged.
4.Make sure the CableCARD is
5.When the CableCARD is installed, note all screen messages that appear (“CableCARD Installed”, “Acquiring Data”, “CableCARD is not Installed”). If the “CableCARD Installed” message does not appear when card is installed, check the TV’s card slot and CableCARD pins for obstructions or damage.
6.If problems still remain, please contact your Cable Service Provider.
Video
Audio
TV Guide On Screen
Channel Manager
Locks
Timers
Setup
Power Swivel
Move SEL Select
Setup
Setup The Menu Options
Set The Screen Saver
Set The Inputs
Set The AV Net
Set The Closed Captions
Set The IR Out
CableCARD Information
Select The Quick Start Option
Reset The Software
Move SEL Select
Setup
CableCARD Information
Select the button below to acess
CableCARD ID and Host ID.
CableCARD Info.
Select the button below to access
CableCARD and Host Diagnostics.
Diagnostics Info.
Move | SEL Return |
In order to start cable service for this device, please contact your cable provider
CableCARD(tm):
Host:
Data:
Unit Address:
Press EXIT to return
When a CableCARD is installed, Auto Channel scan will not be needed because the channel list is automatically loaded to the TV's channel memory.
2.The TV will take several minutes to detect and recognize the presence of the CableCARD. This process must be completed before any CableCARD information or Channel listings is accessed.
77