Channel Manager
Channel Manager
Select CHANNEL MANAGER to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel List.
1.Press CURSOR PAD , to highlight functions.
2.Press the SELECT button or CURSOR PAD to select.
Signal Meter
Select SIGNAL METER when using an indoor or outdoor antenna. This feature will show the signal strength and peak values of the Antenna signal to help you adjust your antenna to optimize signal reception.
Also this feature will show you the status of the Out Of Band (OOB) channel, if locked or unlocked as monitoring the noise rejection and the frequency values of the OOB channel.
Use the CURSOR PADS and the SELECT button to highlight and select CLOSE to exit.
NOTE: 1. The Signal Meter will not be available (grayed out) when watching analog channels.
2.The OOB options work only for CableCARD channels.
Auto Channel Scan
This feature will automatically store active Analog and Digital channels in Auto Channel Scan memory.
1.Use the CURSOR buttons or to highlight AIR, CABLE (1) or CABLE(2) source.
2.Press the CURSOR buttons or to highlight the START or RESET option.
3.Press the SELECT button to select.
NOTE: 1. If certain channels are poor or not possible in cable(1) mode, set cable source to cable(2) by using the CURSOR buttons or .
Video
Audio
TV Guide On Screen
Channel Manager
Locks
Timers
Setup
Power Swivel
Move SEL Select
| Channel Manager | |
| Signal Meter |
|
OR | Auto Channel Scan | |
|
| |
| Channel List |
|
| Move | SEL Select |
| Channel Manager | |
| Signal Meter |
|
OR | Auto Channel Scan | |
|
| |
| Channel List |
|
| Move | SEL Select |
Channel Manager
Signal Meter
Channel | 3 - 1 |
|
Strength | 91 |
|
Peak | 91 |
|
SNR | 10 |
|
OOB Lock/Unlock Lock | ||
OOB SNR | 60 dB | |
OOB Frequency 105 MHz
Close
Move SEL Return
Channel Manager
Signal Meter
Auto Channel Scan
Channel List
Move SEL Select
Channel Manager
Auto Channel Scan
OR
SourceAir
Auto Channel Scan | Start | Reset |
Move SEL Return
55