OTHER FUNCTIONS
ASPECT MODE
The function shown as below is designed for the
1.When non HD component signal is received
You may set different aspect modes to view the image with different signal formats.
You can change between four different modes, 4:3 , 4:3 Zoom , 16:9 and 16:9 Zoom .
Please see the following on each of four modes for details.
Signal sources
For example: | For example: | For example: | ||||||
Conventional TV | 16:9 widescreen cinema | signal transformed | ||||||
broadcast format |
|
|
| from HD | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
=RRP
Suggested
aspect
mode
=RRP
To switch aspect mode, please press the P.SIZE button, the TV will display the corresponding aspect mode momentarily on the lower part of the screen. For example, set the current aspect mode to 4:3 as shown on the lower left side. If 4:3 Zoom is set as shown on the lower right side, you can press the ŸP+
źP-
cursor buttons to adjust the display position up and down before the words =RRP 6FUROO
disappears as shown on the lower right side.
`
=RRP 6FUROO
2.When HD component signal is received
Press the P.SIZE button to switch between two different modes, 16:9 and 16:9Zoom .
Remark:
If you change program No. or power on the TV, the aspect mode will return to the mode of 16:9 (when HD signal is received ) or 4:3 (when conventional signal is received).
Notes
1Do not watch TV at non full screen, as this may cause damage to your PRT.
2Using this special function (aspect mode) to change the size of image displayed (i.e., change the ratio of height and width) for the purpose of public release or some commercial interests may infringe the copyright law.
3In multi picture, pressing the P.SIZE button does not function.
41