Hitachi C43-FL9000, C52-WD9000 instruction manual HD Signal Through Mode, INPUT2

Page 47

OTHER FUNCTIONS

The function shown as below is designed for the C52-WD9000 model.

HD SIGNAL THROUGH MODE

This TV incorporates a HD signal through mode to display more actual HD picture. When receiving HD signal, you can switch between the HD signal through and HD signal non-through modes to obtain optimum picture.

To access HD signal through mode, please follow the following procedures:

1.Input HD signal to component terminals Y, PB/CB, PR/CR of INPUT1 (or HDMI INPUT interface) or

INPUT2.

Note:HD signal through mode is only for 1080i/50Hz and 1080i/60Hz. It is not available for other HD signal formats (for example:720p/60Hz).

2.Set the Dynamic Contrast and Color Manager in the Picture menu to Off, and set the Scan Mode in the Function menu to HD.

Note:If you set the Dynamic Contrast or Color Manager to On, or you do not set Scan Mode to HD, it will exit from HD signal through mode.

3.Set the aspect mode to 16:9 by pressing the P.SIZE button.

Note:When the aspect mode is set to Expanded or 16:9 Zoom , it will exit HD signal through mode.

Notes

1.When HD signal through and non-through mode are swapping, the picture will become black instantly. This is normal.

2.In this mode, the multi pictures displayed will be in non-through mode when using Multi Picture function. Exit from Multi Picture mode, the TV will return to HD signal through mode.

47

Image 47

Contents / Contents Forbidden actions Required actions Safety TipsAvoid any kind of impact to your television Cleaning Precautions when movingMoisture Condensation Best spot for viewing Before Using this Projection Color TVLocation Precautions when using the remote control unit Connect the power cord and the antennaPrecautions when connecting the antenna Precautions when using the batteriesControl panel and side panel Functional PARTSFunctional PARTS Terminals Functional PartsRear panel On the remote control unit To Turn OFF the Power Power on/offTo Turn on the Power When the SET is AT StandbyInstructions for operating menu Getting StartedMenu Selecting the on-screen display languageEasy Preset Picture Menu ON-SCREEN Display Menu Picture MenuTop right to select the Color Manager option, then press When the Color Manager option shown on the right isSet to On, you can adjust and balance their individual If the option of Reset was selected and press the EnterAudio Menu ON-SCREEN Display Menu Audio MenuOn Timer ON-SCREEN Display Menu Timer MenuTimer Menu Off TimerAuto P.Size option ON-SCREEN Display Menu Function MenuFunction Menu SDQGHG 3UHVHW ON-SCREEN Display Menu Setup MenuPress Cursor buttons to select the Program Press the Ÿ ź cursor buttons to select the Sound System 5.5, 6.0 or 6.5 Note Here the unit MHz is omittedPAL, SECAM, NTSC4.43 or NTSC3.58 AntennaTV/VIDEO AV5LQH7XQLQJ 3URJFKDQJH Select the Auto Mute option as shown on the right Remarks Auto LinkSpeaker West Europe ON-SCREEN Diplay Menu Setup MenuAudio Out Text LanguageTo save the adjusted data and exit from adjustment mode Convergence AdjustmentMulti PIC Multi PictureSplit UHHH 6WLOO 5HVHW 6HOHFW 6HW 5HWXUQ Multi Picture $9 Multi Picture CH Surf CH Surf FunctionMode Strobe function is as shown below Teletext Remark Other Functions169Zoom Expanded 43Zoom1 43Zoom2 TV P.Size169 Size169Zoom Or Expanded mode16 9Zoom Expanded 43Zoom1 43Zoom2 Auto P.Size169 169Zoom Expanded 43Zoom1Recall Index Recall ModeRecall Cancel RecallSize button TV/VIDEO buttonRecall button CH I/II buttonINPUT2 HD Signal Through ModeTypical connection of video camera, VCR, etc Connection with Other EquipmentJacks and connections of side panel Typical connection of rear panel Connection with Other EQUIPMENTJacks and connections of rear panel Hdmi Input About HdmiRear panel Typical connection of79$6&175VIDEO,PB/CB,PR/CR About the jacks and connections of rear panelAddenda Guide to simple problem solvingAccessories ADDENDA Specifications