Magnavox 32MF338B user manual Information, Glossary, Maintenance, With an AM radio

Page 36

INFORMATION

5Glossary

ATSC

Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards.

Aspect Ratio

The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height).

Component Video

This is a video signal format that conveys each of 3 principal colors of light (red, blue and green) through different signal lines. This allows the viewers to experience picture colors as original as it is. There are several signal formats, including Y / Pb / Pr and Y / Cb / Cr.

Dolby Digital

The system developed by Dolby Laboratories to compress digital sound. It offers stereo sound (2ch) or multi-channel audio.

HDMI (high-definition multimedia interface)

Interface that supports all uncompressed, digital audio/video formats including set-top box, DVD player or digital television, over a single cable.

HDTV (high definition TV)

Ultimate digital format that produces high resolution and high picture quality.

NTSC

Acronym that stands for National Television Systems Committee and the name of the current analog broadcasting standards.

Pin

A stored 4-digit number that allows access to parental control features.

SAP (secondary audio program)

Second-audio channel delivered separately from main-audio channel. This audio channel is used as an alternate in bilingual broadcasting.

SDTV (standard definition TV)

Standard digital format that is similar to the NTSC picture quality.

S-video

Offers higher quality images by delivering each signal, color (c) and luminance (y) independently of each other through separate cables.

5Maintenance

Cabinet Cleaning

•Wipe the front panel and other exterior surfaces of the TV with a soft cloth immersed in lukewarm water and wrung dry.

•Never use a solvent or alcohol. Do not spray insecticide liquid near the TV. Such chemicals may cause damage and discoloration to the exposed surfaces.

Panel Cleaning

Wipe the panel of the TV with a soft cloth. Before cleaning the panel, disconnect the power cord.

Servicing

Should your TV become inoperative, do not try to correct the problem yourself. There are no user serviceable parts inside. Turn off the TV, unplug the power cord and call our toll free customer support line found on the cover of this manual to locate an authorized service center.

IR Signal Check

If the remote control is not working properly, you can use an AM radio or digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal.

• With an AM radio:

Tune the AM radio station to a non-broadcasting frequency. Point the remote control towards it, push any button and listen. If the sound from the radio fl utters, it is receiving the remote control’s infrared signal.

•With a digital camera

(including built-in cell phone cameras):

Point a digital camera towards the remote control.

Push any button on the remote control and look through the digital camera. If the infrared light appears through the camera, the remote control is working.

36

EN

A8AF2UH_32MF338 B_EN_v2.indd 36

2008/02/15 14:53:01

Page 35 Page 37
Image 36
Page 35 Page 37
Contents 32MF338B LCD TV Notification For Customer UseIntroduction Read before operating equipmentWhen Carrying this TV FCC WarningRADIO-TV Interference To Avoid the Hazards of Electrical Shock and Fire5Supplied Accessories 5Symbols Used in this Manual5Mounting the TV Stand Features ContentsDTV/TV/CATV 5Buttons on the Remote Control 5Installing the BatteriesBattery Precautions BackVolume 5Control Panel5Rear Panel ChannelPreparation 5Basic ConnectionAntenna Connection Connection to Cable Receiver Box or Satellite Box5External Device Connection Hdmi ConnectionHDMI-DVI Connection Component Video Connection Video ConnectionVideo in Connection Audio Output ConnectionFollowing signals can be displayed PC ConnectionFormat Initial Setting 5Initial SetupBefore you begin Make sure if the TV is connected to antenna or cables5Main Menu Autoprogram5Language Selection Press Menu to exit5Volume Adjustment To Cancel the Sleep TimerWatching TV 5Channel Selection5Still Mode 5Switching Each Input Mode5Switching Audio Mode 5Screen Information Broadcasting InformationPress Info 5TV Screen Display Mode For 169 video signalFor 43 video signal Optional Setting 5Channel List 5Add ChannelsChannel registration list Use Cursor K/L to select Channel List, then press OK5Antenna Confirmation Use Cursor K/L to select Antenna, then press OK5Picture Adjustment Adjust the picture qualityUse Cursor s/B to adjust Smart Picture5Sound Adjustment Reset Sound SettingsYou can adjust treble and bass Treble, BassCaption Mode 5Closed CaptionCC-1 and T-1 CC-3 and T-35DTV Closed Caption DTV CCUse Cursor K/L to select DTV CC, then press OK 5CC Style Font StyleFont Size Font Color Edge TypeFont Opacity Back Color5Parental Control Use Cursor K/L to select Parental Control, then press OKTo Set the Sub Ratings Association of AmericaUse Cursor K/L to select US Movie ratings lock Then press OK Press OKUse Cursor K/L to select Change Pin, then press TV-Y5PC Settings Clock, PhaseAuto Adjustment Horizontal Position, Vertical Position 5HDMI Audio Use Cursor K/L to select HDMI1 Audio Source, then press OKTroubleshooting 5Troubleshooting GuideAll connections once before calling for service Check the batteries of the remote control Refer to IR Signal Check onMay interrupt the remote control signal of this TV CH. / . Refer to Switching Each Input Mode onMaintenance InformationGlossary With an AM radio5Specifications Warranty Coverage What is CoveredWhat is not Covered Exclusions Limitations This Limited Warranty does not cover
Top Page Image Contents