Magnavox 46MF401B Edges of the screen, Movie Expand displays a 169 picture that is, Normal

English

TV Screen Display Mode

5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display modes can be selected for PC input signal.

Press FORMAT repeatedly to switch the TV aspect ratio.

For 16:9 video signal					Normal displays a 16:9 picture at its original size.
					4:3 displays a 16:9 picture at a 4:3 size; the picture
					is shortened horizontally. Sidebars appear on both
					edges of the screen.
					Movie Expand displays a 16:9 picture that is
Normal		4:3		Movie Expand vertically stretched to fill the screen. This only crops
					out the top of the picture.
					Zoom displays a 16:9 picture at its maximum size
					without changing its horizontal and vertical ratio.
					Wide displays a horizontally stretched picture. This
					crops out the left and right sides of the picture.
	Wide			Zoom
					Normal displays a 4:3 picture at its original size.
For 4:3 video signal
					Sidebars appear on both edges of the screen.
					16:9 displays a 4:3 picture at a 16:9 size; the picture is
					stretched horizontally to fill the screen.
					Movie Expand displays a 4:3 picture at a 16:9 size;
Normal		16:9		Movie Expand	the picture is stretched more vertically at the top of
					the screen. This crops out the top of the picture.
					Zoom displays a 4:3 picture at a 16:9 size; at its
					maximum size that is more vertically stretched to fill
					the screen.This crops out the top and bottom of the
					picture.
	Wide			Zoom
					Wide displays the picture with its center at the
					original size and the edges stretched horizontally to
					fill the screen.
For PC input signal through			Input mode		Normal displays a proportionately stretched picture.
		HDMI1
					Sidebars appear on both edges of the screen.

		Full displays a picture that is stretched out of
		proportion horizontally to fill the screen.
		Dot By Dot displays a picture in its original size.
Normal	Full	Dot By Dot

INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING

Sound Functions

describe how to change the audio or the audio language as well as the volume.

Volume Adjustment

Use VOL + / − to adjust the volume.

INFORMATION

Silence Mode

Volume 30

will be displayed for a few seconds when adjusting the volume. Press MUTE to turn off the sound temporarily.

	will be displayed for a few seconds.	hi!		hola!
Mute			salut!
• Press MUTE again or VOL + / − to recover the
original volume.
Switching Audio Mode
ATSC		NTSC

Press SAP repeatedly to cycle through the available audio languages.

•Available languages differ depending on the broadcast.

•[Other] is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.

11.1

English 1/3

Press SAP to display the currently selected audio mode.

While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel.

11

SAP / STEREO

e.g.) When all audio are available

SAP / STEREO SAP / MONO SAP / STEREO

STEREO : Outputs stereo-audio

SAP : Outputs second audio program

MONO : Outputs mono-audio

17

EN