INFORMATION
Glossary
ATSC
Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards.
Aspect Ratio
The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height).
Component Video
This is a video signal format that conveys each of 3 principal colors of light (red, blue and green) through different signal lines.This allows the viewers to experience picture colors as original as it is.There are several signal formats, including Y / Pb / Pr and Y / Cb / Cr.
Dolby Digital
The system developed by Dolby Laboratories to compress digital sound. It offers stereo sound (2ch) or
HDMI
Interface that supports all uncompressed, digital audio / video formats including
HDTV (High Definition TV)
Ultimate digital format that produces high resolution and high picture quality.
NTSC
Acronym that stands for National Television Systems Committee and the name of analog broadcasting standards.
Off the air NTSC signals are no longer being sent by major broadcasting stations in the USA.
PIN code
A stored
SAP (Secondary Audio Program)
SDTV (Standard Definition TV)
Standard digital format that is similar to the NTSC picture quality.
S-Video
Offers higher quality images by delivering each signal, color (c) and luminance (y) independently of each other through a single cable.
English
Maintenance | INTRODUCTION | |
Cabinet Cleaning | PREPARATION | |
• Never use a solvent or alcohol. Do not spray insecticide | ||
• Wipe the front panel and other exterior surfaces of the |
| |
unit with a soft cloth. |
| |
liquid near the unit. Such chemicals may cause damage and |
| |
discoloration to the exposed surfaces. | WATCHINGTV | |
the panel, disconnect the AC power cord. | ||
Panel Cleaning |
| |
Wipe the panel of the unit with a soft cloth. Before cleaning | OPTIONAL | |
Servicing | ||
| ||
Should your unit become inoperative, do not try to correct |
| |
the problem yourself.There are no user serviceable parts | SETTING | |
inside. Call our toll free customer support line found on the | ||
| ||
cover of this manual to locate an authorized service center. | TROUBLESHOOTING | |
IR Signal Check | ||
| ||
If the remote control is not working properly, you can use a |
| |
digital camera (including a cellular phone with |
| |
to see if it is sending out an infrared signal. |
| |
With a digital camera |
| |
(including | INFORMATION | |
Point the Digital Camera towards the remote | ||
| ||
control infrared diode at the front of the |
| |
remote control. Press any button on the |
| |
remote control and look through the camera |
| |
display. If the infrared pulsating light appears |
| |
through the camera, the remote control is |
| |
sending out an IR signal. |
|
35
EN