Select the channel number to add or delete

Magnavox ZC352MW8 owner manual Select the channel number to add or delete, Press Setup to exit

Page 22

CHANNEL SETTING

ANALOG

5Select the channel number to add or delete.

•Use [CHANNEL / ] to cycle through only the memorized channels.

•Use [{ / B] to cycle through all the channels including the ones not memorized.

•Use [the Number buttons] to select a channel directly.

•When a memorized channel is selected, “Add” is checked and highlighted as a default.

•When an unmemorized channel is selected “Delete” is checked and highlighted as a default.

6Use [K / L] to select “Add” or “Delete”, then press [OK].

Manual Channel Preset

CH 2

Add

Delete

Your setting will be activated and it will automatically switch to the next channel so that you can continue adding or deleting channels.

7Press [SETUP] to exit.

DIGITAL

5Select the channel number to delete.

•Only the major channel is displayed in “Manual Channel Preset” menu. (The channel number displayed in the parenthesis is a virtual channel number)

•Use [CHANNEL / ] to cycle through only the memorized channels.

•You cannot use [{ / B] for the digital TV channel selection.

•Use [the Number buttons] to select a channel directly.

•When a memorized channel is selected, “Add” is checked and highlighted as a default.

•When an unmemorized channel is selected “Delete” is checked and highlighted as a default.

6Use [K / L] to select “Delete”, then press [OK]. Then select the next channel to delete.

•If the setting is complete, press [RETURN] to activate “Manual Channel Preset”.

Manual Channel Preset

DTV 2 (CH - - - )

Add

Delete

Your setting will be activated.

WARNING:

•For the digital TV channels, you cannot recover the deleted channels once they are deleted unless you perform the auto channel preset again.

7Press [SETUP] to exit.

22 EN

Image 22

Contents

ZC352MW8 Laser Safety PrecautionsMake your contribution to the environment Important Safeguards PrecautionsAvoid the Hazards of Electrical Shock and Fire Installation LocationSupplied Accessories Moisture Condensation WarningCleaning discs Maintenance ServicingCleaning the cabinet Cleaning the disc lens Disc handlingContents Features Front Panel Functional Overview14 13 Functional Overview Rear PanelUsing a Remote Control Remote ControlInstalling the Batteries in the Remote Control Open the cover Insert batteriesREC Mode button Confirm button Analog modeDigital mode Setup buttonAntenna Cable Connection Supplied cables used in this connection are as followsPlug in the power cords of the devices to the AC outlet RF Modulator ConnectionWith this setup You cannot record one channel while watching another channelConnections Connection to a TVThis unit Analog audio Digital audio Input jacks Connection to AN Audio SystemAudio Digital audio coaxial cableOn-Screen Display / Menu Broadcast station Program title max lines displayed Guide to ON-SCREEN Displays and Menus Main MenuInitial Setting Use K / L to select the typeUse K / L to select Auto Channel Preset, then press OK Channel SettingPress Setup Use K / L to select Channel, then press OK When scanning is over, press Setup to exitAdding / Deleting Channels Channel SettingPress DTV/TV to select the mode To add/delete channelsSelect the channel number to delete Press Setup to exitSelect the channel number to add or delete Use K / L to select Add or Delete, then press OKSetting the Clock Auto Clock SettingDaylight Saving Time Setting the ClockUse K / L to select Clock, then Press Setup Press OK Use / B to select an item to setSwitching Analog Mode Digital Mode Tuner SettingsChannel Selection Tuner Settings Selecting TV AudioStereo Selecting TV Audio cont’dSAP secondary audio program DTV Closed Caption Press Setup to exitService 1 to Service Use K / L to select DTV CC, then press OKClosed Caption Style Use K / L to select User Setting, then press OKUse K / L to select ON, then press OK Edge Type Font SizeFont Style Font OpacityRecordable Discs Recording ModeInformation on DVD Recording Unrecordable DiscsBefore Recording Setting for Auto ChapterPress Setup to exit Make Recording CompatiblePress OPEN/CLOSE a to close the disc tray Press REC Mode to select a recording modePress STANDBY-ON y It may take a while to load Disc completelyBasic Recording & ONE-TOUCH Timer Recording Press Stop C to exit the title listUse K / L to enter the date, then press B Timer RecordingNumber, then press OK Use K / L to select a programTimer Recording To stop the timer recording in process Hints for Timer Recording Priority of Overlapped SettingsTitle Overwriting Unnecessary TitleOverwriting from the Beginning Overwriting in the Middle of the TitleOverwrite recording a Existing title B After overwriting Overwriting Unnecessary TitleHints for Overwriting Overwrite recording a Existing title B Existing title CUse K / L to select Video Input Settings, then press OKConnection to an External Device External deviceSettings for AN External Device Recording from an External DeviceTo cancel the disc protect Setting a Disc to ProtectUse K / L to select Yes, then press OK Finalizing is completed Press Setup Use K / L to select Disc Edit, then press OKFinalizing a Disc DVD-RW onlyUse K / L to select Recording, then press OK Playing the Discs in Other DVD PlayersAuto Finalizing Use K / L to select Auto Finalize, then press OKInformation on Playback Press Play B to start playback Basic PlaybackDirect Playback Press Stop C once to stop playback temporarilyBasic Playback Playback from the Title ListUse K / L to select Play, then Use K / L to select a desired titleTemporarily Press OKPlaying Back a CD-RW/-R with MP3 Files Follow steps 1 to 2 in Direct Playback onDuring playback, press Pause F Using the Title / Disc MenuPause Playback will be paused and sound will be mutedFast Forward / Fast Reverse Playback Special PlaybackResume Playback Skipping TV Commercials During PlaybackStep by Step Playback Special PlaybackRapid Playback Slow Forward / Slow Reverse PlaybackZoom Marker SettingAudio CD Search Using Prev H / Next GUsing Display Title / Chapter SearchSearch Time SearchAudio CD, video CD Repeat PlaybackRandom Playback MP3 filesYou can program the disc to play back in your desired order REPEAT/RANDOM/PROGRAM PlaybackProgram Playback Repeat this step until you program all the desired tracksSwitching Audio Soundtrack Switching SubtitlesFor DVD-video Audio soundtrack will switch Selecting the Format of Audio and Video Switching Virtual Surround SystemSwitching Camera Angles Reducing Block NoiseEditing Discs Information on Disc EditingGuide to a Title List Press TitlePress Title Editing DiscsDeleting Titles Use K / L to select Edit, thenUse K / L to select Edit Title Editing DiscsPutting Names on Titles After this operation is completed, press Return to exitPress Return twice to exit Setting Chapter MarksUse K / L to select Add, then press OK Submenu will appearClearing Chapter Marks Chapter Mark DeleteTo delete all chapter marks Clearing Chapter Marks cont’dAll chapter marks will be deleted Hiding Chapters Chapter, then press OK. Submenu will appearPress Return to exit Setting Pictures for ThumbnailsFollow steps 1 to 3 in Deleting You can divide one title into 2 new titles Dividing a TitleTitle will be divided into 2 new titles Name, then press OK. e.g. DVD+RW When you finish entering a title name, pressPutting Name on Disc Window for entering a title name will appearSetting or Releasing Disc Protect Releasing disc from protect Setting or Releasing Disc Protect cont’dOFF, then press OK. e.g. DVD+RW Erasing Disc You can erase all titles on a discMaking Edits Compatible List of Setting Setup Items highlight is the default ContentsList of Setting Setup Items highlight is the defaultWhen you finish with setting, press Setup to exit SetupsRequired Setting Refer toPlayback SetupsUse K / L to select Playback, then Video Default Progressive Scan Disc Audio Default Digital OutPlayback cont’d Language Function Setup Others Parental Lock Default OFFUse the Number buttons to enter the current password Use K / L to select the desired level, then press OKScreen Saver Default 10 minutes OSD Language Default EnglishAngle Icon Default on DisplayRemote control TroubleshootingPower PictureOthers TroubleshootingRecording / Timer recording / Editing You press OPEN/CLOSE aRepairing process MAY not work OPEN/CLOSE a to take out the disc. The disc canceled duringIt may take several minutes up to about several hours Frequently Asked Questions Language Code Language CodeGlossary Recording SpecificationsGeneral TunerCódigos de Región EspañolDiscos Reproducibles Disco GrabableEspañol Cable coaxial de RFArriba Presione STANDBY-ON yPresione OK para activar Ajste Manual de Reloj Presione REC I para iniciar la grabaciónUtilice K / L para seleccionar un Presione TimerConfigure una programación del temporizador Presione OK Número de programa, y luegoTel Customer Service1VMN23378A

Magnavox ZC352MW8 owner manual Select the channel number to add or delete, Press Setup to exit

CHANNEL SETTING

ANALOG

5Select the channel number to add or delete.

•Use [the Number buttons] to select a channel directly.

6Use [K / L] to select “Add” or “Delete”, then press [OK].

7Press [SETUP] to exit.

DIGITAL

5Select the channel number to delete.

Your setting will be activated.