Magnavox ZC352MW8 owner manual Zoom, Marker Setting, Audio CD

SPECIAL PLAYBACK

Zoom Marker Setting

1)During playback, press [DISPLAY].

2)Use [{ / B] to select, then press [OK].

1 1 0:00:00 DVD-Video

3)Use [K / L] to select a desired zoom factor to zoom, then press [OK].

1 1 0:00:00 DVD-Video

1.2

1.5

2.0

Zoom menu will appear. There are four options

(x1.0, x1.2, x1.5 and x2.0), these are displayed excluding the current zoom rate.

Zoom area will be displayed.

4)Use [K / L / { / B] to select a desired zoom position, then press [OK].

This feature allows you to assign a specific point on a disc to be called back later.

1)During playback, press [DISPLAY].

2)Use [{ / B] to select , then press [OK].

1 1 0:00:00 DVD-Video

3)Use [K / L] to select a desired marker number.

When it reaches the desired point, press [OK]. e.g.) DVD-video

1 1 0:00:00 DVD-Video

1---

2---

3---

4---

5---

6---

e.g.) audio CD

1 0:00:00 Audio CD

1---

2---

3---

4---

5---

6---

Zoom playback will start.

Note

•When selecting a smaller factor than the current one, the zoom area will not be displayed.

•To exit the zoom menu, press [DISPLAY] again at step 1.

•To cancel the zoom function, select “x1.0” using [K / L], then press [OK].

The title (track) number and the time will be displayed.

4)To return to the marker later:

Use [K / L] to select the desired marker number, then press [OK].

Note

•To clear a marker, select the marker number to be cleared, then press [CLEAR].

•All markers will be erased when you operate these operations listed below.

–Opening the disc tray

–Turning off the power

–Record on a recordable disc

• You can mark up to 6 points.

• Marker setting is not available when you play back the video CD with PBC function.

54 EN