Magnavox ZC352MW8 Maintenance Servicing, Cleaning the cabinet, Cleaning discs, IR signal check

Page 5

PRECAUTIONS

Maintenance

Servicing

•Please refer to relevant topics on “TROUBLESHOOTING” on pages 83-86 before returning the product.

•If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center.

Cleaning the cabinet

•Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.

Cleaning discs

•When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

•Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the disc lens

•If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING” in this owner's manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

Disc handling

•Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

•Always store the disc in its protective case when it is not used.

IR signal check

If the remote control does not work properly, you can test if the remote control sends out the infrared signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to define the cause of malfunction.

•With an AM radio:

Tune an AM radio to a station with no broadcasting. Press a button on remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control is working.

• With a digital camera (including built-in camera of cellular phone):

Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working.

Introduction Connections Basic Setup Recording Playback

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Dolby Digital Recording

“Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on record- able DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allowing for higher video resolution or extended recording time on each DVD. DVDs created using Dolby Digital Recording will play back on all DVD-video players.”

Note: This is true when the players are compatible with actual recordable DVD discs.

© 2007 Funai Electric Co., Ltd.

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

Editing Function Setup Others

Español

EN 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents ZC352MW8 Make your contribution to the environment PrecautionsLaser Safety Precautions Important SafeguardsSupplied Accessories Installation LocationAvoid the Hazards of Electrical Shock and Fire Moisture Condensation WarningCleaning the cabinet Maintenance ServicingCleaning discs Cleaning the disc lens Disc handlingContents Features 14 13 Functional OverviewFront Panel Rear Panel Functional OverviewInstalling the Batteries in the Remote Control Remote ControlUsing a Remote Control Open the cover Insert batteriesDigital mode Confirm button Analog modeREC Mode button Setup buttonSupplied cables used in this connection are as follows Antenna Cable ConnectionRF Modulator Connection Plug in the power cords of the devices to the AC outletYou cannot record one channel while watching another channel With this setupThis unit Connection to a TVConnections Audio Connection to AN Audio SystemAnalog audio Digital audio Input jacks Digital audio coaxial cableBroadcast station Program title max lines displayed On-Screen Display / MenuMain Menu Guide to ON-SCREEN Displays and MenusUse K / L to select the type Initial SettingPress Setup Use K / L to select Channel, then press OK Channel SettingUse K / L to select Auto Channel Preset, then press OK When scanning is over, press Setup to exitPress DTV/TV to select the mode Channel SettingAdding / Deleting Channels To add/delete channelsSelect the channel number to add or delete Press Setup to exitSelect the channel number to delete Use K / L to select Add or Delete, then press OKAuto Clock Setting Setting the ClockUse K / L to select Clock, then Press Setup Press OK Setting the ClockDaylight Saving Time Use / B to select an item to setChannel Selection Tuner SettingsSwitching Analog Mode Digital Mode Selecting TV Audio Tuner SettingsSAP secondary audio program Selecting TV Audio cont’dStereo Service 1 to Service Press Setup to exitDTV Closed Caption Use K / L to select DTV CC, then press OKUse K / L to select ON, then press OK Use K / L to select User Setting, then press OKClosed Caption Style Font Style Font SizeEdge Type Font OpacityInformation on DVD Recording Recording ModeRecordable Discs Unrecordable DiscsPress Setup to exit Setting for Auto ChapterBefore Recording Make Recording CompatiblePress STANDBY-ON y Press REC Mode to select a recording modePress OPEN/CLOSE a to close the disc tray It may take a while to load Disc completelyPress Stop C to exit the title list Basic Recording & ONE-TOUCH Timer RecordingNumber, then press OK Timer RecordingUse K / L to enter the date, then press B Use K / L to select a programTimer Recording To stop the timer recording in process Priority of Overlapped Settings Hints for Timer RecordingOverwriting from the Beginning Overwriting Unnecessary TitleTitle Overwriting in the Middle of the TitleHints for Overwriting Overwriting Unnecessary TitleOverwrite recording a Existing title B After overwriting Overwrite recording a Existing title B Existing title CConnection to an External Device Settings, then press OKUse K / L to select Video Input External deviceRecording from an External Device Settings for AN External DeviceUse K / L to select Yes, then press OK Setting a Disc to ProtectTo cancel the disc protect Finalizing a Disc Press Setup Use K / L to select Disc Edit, then press OKFinalizing is completed DVD-RW onlyAuto Finalizing Playing the Discs in Other DVD PlayersUse K / L to select Recording, then press OK Use K / L to select Auto Finalize, then press OKInformation on Playback Direct Playback Basic PlaybackPress Play B to start playback Press Stop C once to stop playback temporarilyPlayback from the Title List Basic PlaybackTemporarily Use K / L to select a desired titleUse K / L to select Play, then Press OKFollow steps 1 to 2 in Direct Playback on Playing Back a CD-RW/-R with MP3 FilesPause Using the Title / Disc MenuDuring playback, press Pause F Playback will be paused and sound will be mutedResume Playback Special PlaybackFast Forward / Fast Reverse Playback Skipping TV Commercials During PlaybackRapid Playback Special PlaybackStep by Step Playback Slow Forward / Slow Reverse PlaybackAudio CD Marker SettingZoom Using Display Using Prev H / Next GSearch Title / Chapter SearchTime Search SearchRandom Playback Repeat PlaybackAudio CD, video CD MP3 filesProgram Playback REPEAT/RANDOM/PROGRAM PlaybackYou can program the disc to play back in your desired order Repeat this step until you program all the desired tracksFor DVD-video Audio soundtrack will switch Switching SubtitlesSwitching Audio Soundtrack Switching Camera Angles Switching Virtual Surround SystemSelecting the Format of Audio and Video Reducing Block NoiseGuide to a Title List Information on Disc EditingEditing Discs Press TitleDeleting Titles Editing DiscsPress Title Use K / L to select Edit, thenPutting Names on Titles Editing DiscsUse K / L to select Edit Title After this operation is completed, press Return to exitUse K / L to select Add, then press OK Setting Chapter MarksPress Return twice to exit Submenu will appearChapter Mark Delete Clearing Chapter MarksAll chapter marks will be deleted Clearing Chapter Marks cont’dTo delete all chapter marks Chapter, then press OK. Submenu will appear Hiding ChaptersFollow steps 1 to 3 in Deleting Setting Pictures for ThumbnailsPress Return to exit Title will be divided into 2 new titles Dividing a TitleYou can divide one title into 2 new titles Putting Name on Disc When you finish entering a title name, pressName, then press OK. e.g. DVD+RW Window for entering a title name will appearSetting or Releasing Disc Protect OFF, then press OK. e.g. DVD+RW Setting or Releasing Disc Protect cont’dReleasing disc from protect You can erase all titles on a disc Erasing DiscMaking Edits Compatible Setup Items highlight is the default Contents List of SettingSetup Items highlight is the default List of SettingRequired Setting SetupsWhen you finish with setting, press Setup to exit Refer toUse K / L to select Playback, then SetupsPlayback Playback cont’d Disc Audio Default Digital OutVideo Default Progressive Scan Language Use the Number buttons to enter the current password Parental Lock Default OFFFunction Setup Others Use K / L to select the desired level, then press OKAngle Icon Default on OSD Language Default EnglishScreen Saver Default 10 minutes DisplayPower TroubleshootingRemote control PictureRecording / Timer recording / Editing TroubleshootingOthers You press OPEN/CLOSE aIt may take several minutes up to about several hours OPEN/CLOSE a to take out the disc. The disc canceled duringRepairing process MAY not work Frequently Asked Questions Language Code Language CodeGlossary General SpecificationsRecording TunerDiscos Reproducibles EspañolCódigos de Región Disco GrabableCable coaxial de RF EspañolPresione OK para activar Ajste Manual de Reloj Presione STANDBY-ON yArriba Presione REC I para iniciar la grabaciónConfigure una programación del temporizador Presione OK Presione TimerUtilice K / L para seleccionar un Número de programa, y luego1VMN23378A Customer ServiceTel

ZC352MW8 specifications

The Magnavox ZC352MW8 is a versatile and feature-rich DVD player that caters to a wide range of home entertainment needs. This compact device combines a sleek design with multiple functionalities, making it a suitable choice for anyone looking to enhance their viewing experience. Built with the latest technology, the ZC352MW8 stands out for its superior performance and user-friendly operation.

One of the standout features of the Magnavox ZC352MW8 is its compatibility with various media formats. This DVD player supports standard DVD and CD formats, as well as JPEG, MP3, and WMA formats, allowing users to enjoy their media collection without restrictions. The inclusion of a USB port further enhances this functionality, letting users connect their USB drives and access digital content with ease.

The player’s video quality is impressive, thanks to its advanced upscaling technology, which boosts the resolution of standard DVDs to near-HD quality. This allows viewers to enjoy sharp images and vibrant colors, ensuring that their movie nights are nothing short of cinematic. The 1080p upconversion capability enhances the overall viewing experience, making it ideal for use with high-definition televisions.

In terms of connectivity, the Magnavox ZC352MW8 is equipped with both HDMI and composite outputs. The HDMI output provides a convenient one-cable connection to modern HDTVs, delivering both high-quality video and audio. Alternatively, the composite output supports older televisions, ensuring compatibility across different devices.

User convenience is also prioritized in the design of this DVD player. The ZC352MW8 features a simple, intuitive remote control that makes it easy to navigate menus and select options. The on-screen display is clear and straightforward, further enhancing usability.

Additionally, the player includes features such as program and repeat play, allowing for customizable viewing experiences. Built-in parental controls offer essential content management, making it a great choice for family use.

In summary, the Magnavox ZC352MW8 is a reliable and feature-packed DVD player that meets a variety of home entertainment needs. With its compatibility with multiple formats, high-definition upconversion, versatile connectivity options, and user-friendly design, it stands out as an excellent choice for anyone looking to enjoy their favorite movies and music at home.
Top Page Image Contents