Magnavox ZC352MW8 owner manual Troubleshooting, Power, Picture, Sound, Remote control

Page 83

TROUBLESHOOTING

Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.

Symptom

Remedy

Power

 

The power does not turn on.

• Check that the AC power cord is connected securely.

 

• Check the breaker (in case of power failure).

 

 

Picture

 

There is no picture.

• Re-connect the connecting cords securely.

 

• Check if the connecting cords are damaged.

 

• If the main menu appears on the TV screen, press [RETURN] to exit.

 

• Check the connection to your TV (page 15).

 

• Check if the progressive scan mode is set correctly according to your TV

 

(page 79).

 

• Switch the input selector on your TV (such as to “E1”) so that the signal from

 

the unit appears on the TV screen.

 

 

Picture noise appears.

• Clean the disc with a cleaning cloth.

 

 

Playback picture from the external

• If the picture output signal from the external devices passes through this

devices connected to this unit is

unit to get to your TV, the copy protection signal applied to some DVD could

distorted.

affect the picture quality. Disconnect the playback device in question and

 

connect it directly to your TV.

TV program reception does not

• Try to set the channels with “Auto Channel Preset” or “Manual Channel

fill the TV screen.

Preset” in “Channel” menu (pages 20-22).

 

• Select a channel of any TV program using [CHANNEL / ].

TV program pictures are

• Adjust TV antenna.

distorted.

• Adjust the picture. (Refer to the TV’s instruction manual.)

 

• Place the unit and TV farther apart.

 

• Place the TV and any bunched RF coaxial cables farther apart.

 

 

TV channels cannot be changed.

• Switch the input to TV.

 

• Connect the RF coaxial cable correctly (pages 12-14).

Playback picture is distorted.

• Keep the device which may cause electrical disturbances, such as a cellular

 

phone, away.

 

 

Sound

 

There is no sound.

• Clean the disc with a cleaning cloth.

 

• Re-connect all connections securely.

 

• Check if the connecting cord is damaged.

 

• Check the connections to the amplifier input.

 

• Check if the input device setting on the amplifier is correct.

 

• When the unit is in pause mode or in slow-motion playback mode, sound is

 

not output. This is not a malfunction.

 

• When the unit is in fast forward or fast reverse mode, sound is not output.

 

This is not a malfunction.

 

• If you are using COAXIAL DIGITAL AUDIO OUTPUT jack, check the setting in

 

“Disc Audio” (page 79).

Sound is noisy.

• Clean the disc with a cleaning cloth.

 

 

Remote control

 

The remote control does not

• Batteries are weak.

function.

• There are obstacles between the remote control and the unit.

 

• The remote control is far from the unit.

 

• There are no batteries in the remote control.

 

• Check if the unit is turned on.

 

• Check if you are pointing the remote control at the recorder and NOT the TV.

 

If you have a Plasma TV, it may interfere with the IR signal. Try the remote

 

with the Plasma off. If the remote works, you may need to move the unit

 

away from the plasma TV.

Introduction Connections Basic Setup Recording Playback

Editing Function Setup Others

Español

EN 83

Page 82 Page 84
Image 83
Page 82 Page 84
Contents
ZC352MW8 Make your contribution to the environment PrecautionsLaser Safety Precautions Important SafeguardsMoisture Condensation Warning Installation LocationSupplied Accessories Avoid the Hazards of Electrical Shock and FireCleaning the disc lens Disc handling Maintenance ServicingCleaning the cabinet Cleaning discsContents Features 14 13 Functional OverviewFront Panel Rear Panel Functional OverviewOpen the cover Insert batteries Remote ControlInstalling the Batteries in the Remote Control Using a Remote ControlSetup button Confirm button Analog modeDigital mode REC Mode buttonSupplied cables used in this connection are as follows Antenna Cable ConnectionRF Modulator Connection Plug in the power cords of the devices to the AC outletYou cannot record one channel while watching another channel With this setupThis unit Connection to a TVConnections Digital audio coaxial cable Connection to AN Audio SystemAudio Analog audio Digital audio Input jacksBroadcast station Program title max lines displayed On-Screen Display / MenuMain Menu Guide to ON-SCREEN Displays and MenusUse K / L to select the type Initial SettingWhen scanning is over, press Setup to exit Channel SettingPress Setup Use K / L to select Channel, then press OK Use K / L to select Auto Channel Preset, then press OKTo add/delete channels Channel SettingPress DTV/TV to select the mode Adding / Deleting ChannelsUse K / L to select Add or Delete, then press OK Press Setup to exitSelect the channel number to add or delete Select the channel number to deleteAuto Clock Setting Setting the ClockUse / B to select an item to set Setting the ClockUse K / L to select Clock, then Press Setup Press OK Daylight Saving TimeChannel Selection Tuner SettingsSwitching Analog Mode Digital Mode Selecting TV Audio Tuner SettingsSAP secondary audio program Selecting TV Audio cont’dStereo Use K / L to select DTV CC, then press OK Press Setup to exitService 1 to Service DTV Closed CaptionUse K / L to select ON, then press OK Use K / L to select User Setting, then press OKClosed Caption Style Font Opacity Font SizeFont Style Edge TypeUnrecordable Discs Recording ModeInformation on DVD Recording Recordable DiscsMake Recording Compatible Setting for Auto ChapterPress Setup to exit Before RecordingIt may take a while to load Disc completely Press REC Mode to select a recording modePress STANDBY-ON y Press OPEN/CLOSE a to close the disc trayPress Stop C to exit the title list Basic Recording & ONE-TOUCH Timer RecordingUse K / L to select a program Timer RecordingNumber, then press OK Use K / L to enter the date, then press BTimer Recording To stop the timer recording in process Priority of Overlapped Settings Hints for Timer RecordingOverwriting in the Middle of the Title Overwriting Unnecessary TitleOverwriting from the Beginning TitleOverwrite recording a Existing title B Existing title C Overwriting Unnecessary TitleHints for Overwriting Overwrite recording a Existing title B After overwritingExternal device Settings, then press OKConnection to an External Device Use K / L to select Video InputRecording from an External Device Settings for AN External DeviceUse K / L to select Yes, then press OK Setting a Disc to ProtectTo cancel the disc protect DVD-RW only Press Setup Use K / L to select Disc Edit, then press OKFinalizing a Disc Finalizing is completedUse K / L to select Auto Finalize, then press OK Playing the Discs in Other DVD PlayersAuto Finalizing Use K / L to select Recording, then press OKInformation on Playback Press Stop C once to stop playback temporarily Basic PlaybackDirect Playback Press Play B to start playbackPlayback from the Title List Basic PlaybackPress OK Use K / L to select a desired titleTemporarily Use K / L to select Play, thenFollow steps 1 to 2 in Direct Playback on Playing Back a CD-RW/-R with MP3 FilesPlayback will be paused and sound will be muted Using the Title / Disc MenuPause During playback, press Pause FSkipping TV Commercials During Playback Special PlaybackResume Playback Fast Forward / Fast Reverse PlaybackSlow Forward / Slow Reverse Playback Special PlaybackRapid Playback Step by Step PlaybackAudio CD Marker SettingZoom Title / Chapter Search Using Prev H / Next GUsing Display SearchTime Search SearchMP3 files Repeat PlaybackRandom Playback Audio CD, video CDRepeat this step until you program all the desired tracks REPEAT/RANDOM/PROGRAM PlaybackProgram Playback You can program the disc to play back in your desired orderFor DVD-video Audio soundtrack will switch Switching SubtitlesSwitching Audio Soundtrack Reducing Block Noise Switching Virtual Surround SystemSwitching Camera Angles Selecting the Format of Audio and VideoPress Title Information on Disc EditingGuide to a Title List Editing DiscsUse K / L to select Edit, then Editing DiscsDeleting Titles Press TitleAfter this operation is completed, press Return to exit Editing DiscsPutting Names on Titles Use K / L to select Edit TitleSubmenu will appear Setting Chapter MarksUse K / L to select Add, then press OK Press Return twice to exitChapter Mark Delete Clearing Chapter MarksAll chapter marks will be deleted Clearing Chapter Marks cont’dTo delete all chapter marks Chapter, then press OK. Submenu will appear Hiding ChaptersFollow steps 1 to 3 in Deleting Setting Pictures for ThumbnailsPress Return to exit Title will be divided into 2 new titles Dividing a TitleYou can divide one title into 2 new titles Window for entering a title name will appear When you finish entering a title name, pressPutting Name on Disc Name, then press OK. e.g. DVD+RWSetting or Releasing Disc Protect OFF, then press OK. e.g. DVD+RW Setting or Releasing Disc Protect cont’dReleasing disc from protect You can erase all titles on a disc Erasing DiscMaking Edits Compatible Setup Items highlight is the default Contents List of SettingSetup Items highlight is the default List of SettingRefer to SetupsRequired Setting When you finish with setting, press Setup to exitUse K / L to select Playback, then SetupsPlayback Playback cont’d Disc Audio Default Digital Out Video Default Progressive Scan Language Use K / L to select the desired level, then press OK Parental Lock Default OFFUse the Number buttons to enter the current password Function Setup OthersDisplay OSD Language Default EnglishAngle Icon Default on Screen Saver Default 10 minutesPicture TroubleshootingPower Remote controlYou press OPEN/CLOSE a TroubleshootingRecording / Timer recording / Editing OthersIt may take several minutes up to about several hours OPEN/CLOSE a to take out the disc. The disc canceled duringRepairing process MAY not work Frequently Asked Questions Language Code Language CodeGlossary Tuner SpecificationsGeneral RecordingDisco Grabable EspañolDiscos Reproducibles Códigos de RegiónCable coaxial de RF EspañolPresione REC I para iniciar la grabación Presione STANDBY-ON yPresione OK para activar Ajste Manual de Reloj ArribaNúmero de programa, y luego Presione TimerConfigure una programación del temporizador Presione OK Utilice K / L para seleccionar un1VMN23378A Customer ServiceTel
Top Page Image Contents