Magnavox ZC352MW8 Playback cont’d, Disc Audio Default Digital Out, Video Default Progressive Scan

Page 79

SETUPS

Playback (cont’d)

1 Disc Audio (Default: Digital Out)

Choose the appropriate audio setting for your external device.

It will only affect a disc playback.

Use [K / L] to select a desired item, then press [OK].

Disc Audio

Digital Out

 

Dynamic Range Control

ON

Digital Out

Set the digital audio output.

Use [K / L] to select a setting, then press [OK].

Digital Out

PCM

48kHz

Dolby Digital

Stream

 

 

Selection menu will appear. Proceed to step A or B .

A Settings for PCM (Default : 48kHz)

Use [K / L] to select a setting, then press [OK].

 

 

 

Digital Out - PCM

 

 

 

 

 

 

 

 

48kHz

 

 

 

 

96kHz

 

 

 

 

 

Your setting will be activated.

48kHz

: If your amplifier/decoder is NOT compatible

 

with 96kHz PCM, select “48kHz”. 96kHz sound

 

will be output in 48kHz.

96kHz

: If your amplifier/decoder is compatible with

 

96kHz PCM, select “96kHz”. 96kHz sound will

 

be output.

Note

When playing back disc with copyright protection

•Even if you select “96kHz”, the sound will be down sampled at 48kHz.

B Settings for Dolby Digital (Default : Stream)

Use [K / L] to select a setting, then press [OK].

 

 

 

Digital Out - Dolby Digital

 

 

 

 

 

 

 

 

PCM

 

 

 

 

Stream

 

 

 

 

 

Your setting will be activated.

PCM

: Converts the Dolby Digital into PCM (2 channel).

 

When your amplifier/decoder is NOT

 

compatible with Dolby Digital, set to “PCM”.

Stream

: Outputs Dolby Digital signals

 

When your amplifier/decoder is compatible

 

with Dolby Digital, set to “Stream”.

Dynamic Range Control (Default : ON)

Set to “ON” to compress the range between soft and loud sounds.

Use [K / L] to select a setting, then press [OK].

Dynamic Range Control

ON

OFF

Your setting will be activated.

Note

•Dynamic range control function is available only on the discs which are recorded in the Dolby Digital format.

2 Video (Default: Progressive Scan)

Use [K / L] to select a desired item, then press [OK].

Video

Progressive Scan

OFF

Still Mode

Auto

 

 

Progressive Scan (Default : OFF)

This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”.

1) Use [K / L] to select “ON“, then press [OK].

Video - Progressive Scan

ON

OFF

2) Use [{ / B] to select “Yes“, then press [OK].

Video - Progressive Scan

Activating progressive scan:

Check your TV has progressive scan

and connect with component video cable.

NOTE:

If there is no picture or picture is distorted after selecting “Yes”,

Wait about 15 seconds for auto recovery.

Activate?

Yes

No

3)Use [K / L] to select “Yes“ within 15 seconds, then press [OK].

Your setting will be activated.

Note

•If your TV is compatible with progressive scan (525p / 480p), you are recommended to use the component video cable (commercially available) to connect this unit to the TV. (Refer to “Method 3” on page 15.) If not, use the RCA video cable and set the progressive scan to “OFF” or press and hold [SETUP] for more than 3 seconds during DVD playback.

•When selecting “No” or not pressing any buttons on the unit or remote control within 15 seconds at step 3, progressive scan remains to be “OFF” (interlace scan).

Introduction Connections Basic Setup Recording Playback

Editing Function Setup Others

Español

EN 79

Page 78 Page 80
Image 79
Page 78 Page 80
Contents ZC352MW8 Laser Safety PrecautionsMake your contribution to the environment Precautions Important SafeguardsMoisture Condensation Warning Installation LocationSupplied Accessories Avoid the Hazards of Electrical Shock and FireCleaning the disc lens Disc handling Maintenance ServicingCleaning the cabinet Cleaning discsContents Features Front Panel Functional Overview14 13 Rear Panel Functional OverviewOpen the cover Insert batteries Remote ControlInstalling the Batteries in the Remote Control Using a Remote ControlSetup button Confirm button Analog modeDigital mode REC Mode buttonSupplied cables used in this connection are as follows Antenna Cable ConnectionRF Modulator Connection Plug in the power cords of the devices to the AC outletYou cannot record one channel while watching another channel With this setupConnections Connection to a TVThis unit Digital audio coaxial cable Connection to AN Audio SystemAudio Analog audio Digital audio Input jacksBroadcast station Program title max lines displayed On-Screen Display / MenuMain Menu Guide to ON-SCREEN Displays and MenusUse K / L to select the type Initial SettingWhen scanning is over, press Setup to exit Channel SettingPress Setup Use K / L to select Channel, then press OK Use K / L to select Auto Channel Preset, then press OKTo add/delete channels Channel SettingPress DTV/TV to select the mode Adding / Deleting ChannelsUse K / L to select Add or Delete, then press OK Press Setup to exitSelect the channel number to add or delete Select the channel number to deleteAuto Clock Setting Setting the ClockUse / B to select an item to set Setting the ClockUse K / L to select Clock, then Press Setup Press OK Daylight Saving TimeSwitching Analog Mode Digital Mode Tuner SettingsChannel Selection Selecting TV Audio Tuner SettingsStereo Selecting TV Audio cont’dSAP secondary audio program Use K / L to select DTV CC, then press OK Press Setup to exitService 1 to Service DTV Closed CaptionClosed Caption Style Use K / L to select User Setting, then press OKUse K / L to select ON, then press OK Font Opacity Font SizeFont Style Edge TypeUnrecordable Discs Recording ModeInformation on DVD Recording Recordable DiscsMake Recording Compatible Setting for Auto ChapterPress Setup to exit Before RecordingIt may take a while to load Disc completely Press REC Mode to select a recording modePress STANDBY-ON y Press OPEN/CLOSE a to close the disc trayPress Stop C to exit the title list Basic Recording & ONE-TOUCH Timer RecordingUse K / L to select a program Timer RecordingNumber, then press OK Use K / L to enter the date, then press BTimer Recording To stop the timer recording in process Priority of Overlapped Settings Hints for Timer RecordingOverwriting in the Middle of the Title Overwriting Unnecessary TitleOverwriting from the Beginning TitleOverwrite recording a Existing title B Existing title C Overwriting Unnecessary TitleHints for Overwriting Overwrite recording a Existing title B After overwritingExternal device Settings, then press OKConnection to an External Device Use K / L to select Video InputRecording from an External Device Settings for AN External DeviceTo cancel the disc protect Setting a Disc to ProtectUse K / L to select Yes, then press OK DVD-RW only Press Setup Use K / L to select Disc Edit, then press OKFinalizing a Disc Finalizing is completedUse K / L to select Auto Finalize, then press OK Playing the Discs in Other DVD PlayersAuto Finalizing Use K / L to select Recording, then press OKInformation on Playback Press Stop C once to stop playback temporarily Basic PlaybackDirect Playback Press Play B to start playbackPlayback from the Title List Basic PlaybackPress OK Use K / L to select a desired titleTemporarily Use K / L to select Play, thenFollow steps 1 to 2 in Direct Playback on Playing Back a CD-RW/-R with MP3 FilesPlayback will be paused and sound will be muted Using the Title / Disc MenuPause During playback, press Pause FSkipping TV Commercials During Playback Special PlaybackResume Playback Fast Forward / Fast Reverse PlaybackSlow Forward / Slow Reverse Playback Special PlaybackRapid Playback Step by Step PlaybackZoom Marker SettingAudio CD Title / Chapter Search Using Prev H / Next GUsing Display SearchTime Search SearchMP3 files Repeat PlaybackRandom Playback Audio CD, video CDRepeat this step until you program all the desired tracks REPEAT/RANDOM/PROGRAM PlaybackProgram Playback You can program the disc to play back in your desired orderSwitching Audio Soundtrack Switching SubtitlesFor DVD-video Audio soundtrack will switch Reducing Block Noise Switching Virtual Surround SystemSwitching Camera Angles Selecting the Format of Audio and VideoPress Title Information on Disc EditingGuide to a Title List Editing DiscsUse K / L to select Edit, then Editing DiscsDeleting Titles Press TitleAfter this operation is completed, press Return to exit Editing DiscsPutting Names on Titles Use K / L to select Edit TitleSubmenu will appear Setting Chapter MarksUse K / L to select Add, then press OK Press Return twice to exitChapter Mark Delete Clearing Chapter MarksTo delete all chapter marks Clearing Chapter Marks cont’dAll chapter marks will be deleted Chapter, then press OK. Submenu will appear Hiding ChaptersPress Return to exit Setting Pictures for ThumbnailsFollow steps 1 to 3 in Deleting You can divide one title into 2 new titles Dividing a TitleTitle will be divided into 2 new titles Window for entering a title name will appear When you finish entering a title name, pressPutting Name on Disc Name, then press OK. e.g. DVD+RWSetting or Releasing Disc Protect Releasing disc from protect Setting or Releasing Disc Protect cont’dOFF, then press OK. e.g. DVD+RW You can erase all titles on a disc Erasing DiscMaking Edits Compatible Setup Items highlight is the default Contents List of SettingSetup Items highlight is the default List of SettingRefer to SetupsRequired Setting When you finish with setting, press Setup to exitPlayback SetupsUse K / L to select Playback, then Video Default Progressive Scan Disc Audio Default Digital OutPlayback cont’d Language Use K / L to select the desired level, then press OK Parental Lock Default OFFUse the Number buttons to enter the current password Function Setup OthersDisplay OSD Language Default EnglishAngle Icon Default on Screen Saver Default 10 minutesPicture TroubleshootingPower Remote controlYou press OPEN/CLOSE a TroubleshootingRecording / Timer recording / Editing OthersRepairing process MAY not work OPEN/CLOSE a to take out the disc. The disc canceled duringIt may take several minutes up to about several hours Frequently Asked Questions Language Code Language CodeGlossary Tuner SpecificationsGeneral RecordingDisco Grabable EspañolDiscos Reproducibles Códigos de RegiónCable coaxial de RF EspañolPresione REC I para iniciar la grabación Presione STANDBY-ON yPresione OK para activar Ajste Manual de Reloj ArribaNúmero de programa, y luego Presione TimerConfigure una programación del temporizador Presione OK Utilice K / L para seleccionar unTel Customer Service1VMN23378A

ZC352MW8 specifications

The Magnavox ZC352MW8 is a versatile and feature-rich DVD player that caters to a wide range of home entertainment needs. This compact device combines a sleek design with multiple functionalities, making it a suitable choice for anyone looking to enhance their viewing experience. Built with the latest technology, the ZC352MW8 stands out for its superior performance and user-friendly operation.

One of the standout features of the Magnavox ZC352MW8 is its compatibility with various media formats. This DVD player supports standard DVD and CD formats, as well as JPEG, MP3, and WMA formats, allowing users to enjoy their media collection without restrictions. The inclusion of a USB port further enhances this functionality, letting users connect their USB drives and access digital content with ease.

The player’s video quality is impressive, thanks to its advanced upscaling technology, which boosts the resolution of standard DVDs to near-HD quality. This allows viewers to enjoy sharp images and vibrant colors, ensuring that their movie nights are nothing short of cinematic. The 1080p upconversion capability enhances the overall viewing experience, making it ideal for use with high-definition televisions.

In terms of connectivity, the Magnavox ZC352MW8 is equipped with both HDMI and composite outputs. The HDMI output provides a convenient one-cable connection to modern HDTVs, delivering both high-quality video and audio. Alternatively, the composite output supports older televisions, ensuring compatibility across different devices.

User convenience is also prioritized in the design of this DVD player. The ZC352MW8 features a simple, intuitive remote control that makes it easy to navigate menus and select options. The on-screen display is clear and straightforward, further enhancing usability.

Additionally, the player includes features such as program and repeat play, allowing for customizable viewing experiences. Built-in parental controls offer essential content management, making it a great choice for family use.

In summary, the Magnavox ZC352MW8 is a reliable and feature-packed DVD player that meets a variety of home entertainment needs. With its compatibility with multiple formats, high-definition upconversion, versatile connectivity options, and user-friendly design, it stands out as an excellent choice for anyone looking to enjoy their favorite movies and music at home.
Top Page Image Contents