Fostex D-108 owner manual Connecting a mixer

Page 17

D-108 Quick Operation Guide

Connecting a mixer

The D-108 features recorder functions and has eight analog inputs (ANALOG IN 1-8) and eight analog outputs (ANALOG OUT 1-8).

To make multi-track recordings using the D-108, connect it to an external mixing console as shown in the figure below. Basically, the ideal mixer for this setup should have eight TAPE INs and eight BUSS OUTs (or GROUP OUTs). However, you may also use a mixer with eight TAPE INs and four BUSS OUTs.

<Note>

Be sure to turn off the power to all devices before connecting the mixing console.

Connecting a mixer that has eight TAPE INs and eight BUSS OUTs (or GROUP OUTs)

Connect TAPE INs 1-8 of the mixer to ANALOG OUTs 1-8 of the D-108, and connect BUSS OUTs (GROUP OUTs) 1-8 to ANALOG INs 1-8 of the D-108. With this example, you can make simultaneous eight-track recordings.

D-108
	MIDI	DATA	OPTICAL	SCSI
				AC IN
INPUT	OUTPUT	INPUT	OUTPUT

BUSS OUT (GROUP OUT) 1~8

TAPE IN 1~8

Mixing console

Image 17

Contents Welcome to D-108 ModelQuick Operation Guide Table of Contents Recording media Package contentsDisassembling the removable case Using an E-IDE hard diskInstalling a hard disk in a removable case Fixing the hard disk to the case Connecting cablesAssembling the case Installing the removable case in the D-108Connecting a detachable controller Turn on the power to the D-108 Connect the D-108’s power cable to the AC outletFormatting a disk Press the EXECUTE/YES keyProgram Press the EXIT/NO key or the Stop buttonConnecting a Scsi drive to the D-108 Using a Scsi driveInstalling a detachable controller to the D-108 Scsi ID number setting Insert an unformatted disk in the Scsi drive Turn on the power to the D-108 and the Scsi driveFormatting a Scsi disk Record mode Use the JOG dial to select the desired Record modeEjecting the removable disk from the Scsi drive Press the Disp SEL key twice to enter Setup mode Using two current drivesPress the EXECUTE/YES key again Selecting a current driveConnecting a mixer Patchbay Buss OUT Group OUT 1~4 Tape in 1~8 Basic recording Initial settingsSetting sampling frequency Turn the JOG dial to select the desired sampling frequency Press the EXIT/NO key or the Stop button to quit Setup modeBasic analog recording Undo and redo recording To cancel the undo operation, press the Redo key againPing-pong recording Multitrack recording using overdubbingPress the Record button once Locate the top of the ProgramRecording in a new Program MixdownTurn the JOG dial clockwise to select New Program? Press the EXECUTE/YES keySelecting the desired Program from multiple Programs Basic Locate functionLocating the end of the recorded area of the Program Turn the JOG dial clockwise or counter-clockwiseSet the desired pitch data using the JOG dial Playback using the Vari-pitch functionPress the Recall key, then press the Vari Pitch key To turn off Vari Pitch mode, press the Vari Pitch keyReference Fostex Corporation