Fostex D-108 owner manual Patchbay Buss OUT Group OUT 1~4 Tape in 1~8

Page 18

D-108 Quick Operation Guide

Connecting a mixer that has eight TAPE INs and four BUSS OUTs (or GROUP OUTs)

Connect TAPE INs 1-8 of the mixer to ANALOG OUTs 1-8 of the D-108, and connect BUSS OUTs (GROUP OUTs) 1-4 to ANALOG INs 1-4 of the D-108.

In this case, first record Tracks 1-4, then re-patch the cables to record Tracks 5-8. It would be convenient to connect a patch bay between the D-108’s ANALOG INs and the mixer’s BUSS OUTs (GROUP OUTs) so that you can make connections from the front.

D-108
	MIDI	DATA	OPTICAL	SCSI
				AC IN
INPUT	OUTPUT	INPUT	OUTPUT

PATCHBAY

BUSS OUT (GROUP OUT) 1~4

TAPE IN 1~8

Mixing console

18

Image 18

Contents Model Welcome to D-108Quick Operation Guide Table of Contents Package contents Recording mediaUsing an E-IDE hard disk Installing a hard disk in a removable caseDisassembling the removable case Connecting cables Fixing the hard disk to the caseInstalling the removable case in the D-108 Connecting a detachable controllerAssembling the case Formatting a disk Connect the D-108’s power cable to the AC outletTurn on the power to the D-108 Press the EXECUTE/YES keyPress the EXIT/NO key or the Stop button ProgramUsing a Scsi drive Installing a detachable controller to the D-108Connecting a Scsi drive to the D-108 Scsi ID number setting Turn on the power to the D-108 and the Scsi drive Formatting a Scsi diskInsert an unformatted disk in the Scsi drive Use the JOG dial to select the desired Record mode Record modeEjecting the removable disk from the Scsi drive Using two current drives Press the Disp SEL key twice to enter Setup modeSelecting a current drive Press the EXECUTE/YES key againConnecting a mixer Patchbay Buss OUT Group OUT 1~4 Tape in 1~8 Initial settings Setting sampling frequencyBasic recording Press the EXIT/NO key or the Stop button to quit Setup mode Turn the JOG dial to select the desired sampling frequencyBasic analog recording To cancel the undo operation, press the Redo key again Undo and redo recordingPress the Record button once Multitrack recording using overdubbingPing-pong recording Locate the top of the ProgramTurn the JOG dial clockwise to select New Program? MixdownRecording in a new Program Press the EXECUTE/YES keyLocating the end of the recorded area of the Program Basic Locate functionSelecting the desired Program from multiple Programs Turn the JOG dial clockwise or counter-clockwisePress the Recall key, then press the Vari Pitch key Playback using the Vari-pitch functionSet the desired pitch data using the JOG dial To turn off Vari Pitch mode, press the Vari Pitch keyReference Fostex Corporation