8X4 CAT-5 MATRIX FOR HDMI RS-232 COMMANDS
Switching/Routing Binary Table
ASCII | Input | Output | ASCII | Input | Output | |
Command | Command | |||||
|
|
|
| |||
A1 or a1 | 1A | 1 | C1 or c1 | 1A | 3 | |
A2 or a2 | 1B | 1 | C2 or c2 | 1B | 3 | |
A3 or a3 | 2A | 1 | C3 or c3 | 2A | 3 | |
A4 or a4 | 2B | 1 | C4 or c4 | 2B | 3 | |
A5 or a5 | 3A | 1 | C5 or c5 | 3A | 3 | |
A6 or a6 | 3B | 1 | C6 or c6 | 3B | 3 | |
A7 or a7 | 4A | 1 | C7 or c7 | 4A | 3 | |
A8 or a8 | 4B | 1 | C8 or c8 | 4B | 3 | |
B1 or b1 | 1A | 2 | D1 or d1 | 1A | 4 | |
B2 or b2 | 1B | 2 | D2 or d2 | 1B | 4 | |
B3 or b3 | 2A | 2 | D3 or d3 | 2A | 4 | |
B4 or b4 | 2B | 2 | D4 or d4 | 2B | 4 | |
B5 or b5 | 3A | 2 | D5 or d5 | 3A | 4 | |
B6 or b6 | 3B | 2 | D6 or d6 | 3B | 4 | |
B7 or b7 | 4A | 2 | D7 or d7 | 4A | 4 | |
B8 or b8 | 4B | 2 | D8 or d8 | 4B | 4 |
EDID Management Modes
DIP switches 1, 2, 5, and 7 inside the unit must be in their default OFF position for the following commands to work. Use the ASCII commands below to change the EDID modes. For a description of each mode please see page 12.
ASCII | EDID Mode | ASCII | EDID Mode |
m0 | 0 | m5 | 5 |
m1 | 1 | m6 | 6 |
m2 | 2 | m7 | 7 |
m3 | 3 | m8 | 8 |
|
|
|
|
m4 | 4 | m9 | 9 |
Print Matrix Routing State
The following command will print the current matrix routing state.
ASCII
s
15