HDMI OVER CAT-5 RECEIVER RS-232 SERIAL COMMUNICATIONS
What features are available via the
The HDMI Over CAT5 Receiver can accept commands through the
•Switching/routing of inputs to outputs without the
•Setting boost settings without the switching DIP switches.
How do I use these features?
These features were initially intended for utilization by custom installers in automated setups. However, these features can be tested by using any Windows PC with the Hyperterminal program.
What pins are used for communication with the HDMI Over CAT5 Receiver?
Only pins 2 (Receive), 3 (Transmit), and 5 (Ground) are used for communication. A
1 2 3 4 5 | 1 2 3 4 5 |
|
|
|
|
|
|
|
|
|
|
6 7 8 9 | 6 7 8 9 | ||||||||
Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the | |||||||||
What are the communication port settings? |
|
|
|
|
| ||||
Bits per second | 19200 | ||||||||
Data bits | 8 | ||||||||
Parity |
|
|
| None | |||||
Stop bits | 1 | ||||||||
Flow Control |
|
|
| None | |||||
23