Remote control installation
5Remote control installation for: GWH C 950 ES/GWH C800 ES/GWH 715 ES/ GWH 2700 ES/ GWH2400ES
BRemove the 6 screws from the back cover of the control unit, to access the electronic board (PCB) (Fig. 7, pos.2).
5.1Remote control
transceiver PCB installation
Warning: For safety reasons, disconnect the power supply to the water heater
Fig. 7
before performing installation.
Pre-installation preparation
BLoosen the two Philips head screws located on bottom rear of cover.
BLift front cover upward and remove.
BRemove the three screws from the control unit (Fig. 7, pos.1).
Fig. 6
10 | 6 720 606 990 |