Remote control
control (Fig. 12, pos. 3) for 3 seconds.
Note: Previously saved
itemperature may show on the display when first
pushing the program button. Once "PR" shows on the display, the desired setting will be saved.
Fig. 12 Memorizing water temperature
i | Up to six addition remote | |
controls can be used to | ||
|
memorize a temperature for each remote control.
Using the "Program" button
(operation with memorized temperature)
To operate the equipment with a
previously memorized temperature:
BPress the "Program" button on the remote control.
The remote control display and heater display will now show the previously memorized temperature. When the hot water tap is turned on, the water heater will supply hot water after a few
seconds, at the memorized temperature.
B Only one temperature per remote control can be memorized using the "Program" button on the remote control.
BAt this point the remote control will display the memorized temperature . When the hot water tap is turned on, the water heater will supply hot water at the temperature memorized on the remote control.
14 | 6 720 606 990 |