Fujitsu plasmavision user manual Hdmi, Frequency kHz Frequency Hz

In the Comp.video and Video/S-video, the display has been factory-set as follows for different input signals:

English

Main corresponding signals (Comp.video mode)

Horizontal	Vertical	Signal	HDMI
frequency (kHz)	frequency (Hz)
15.73	59.94	SDTV 480i
15.63	50.00	SDTV 576i
31.47	59.94	SDTV 480p
31.25	50.00	SDTV 576p
45.00	60.00	HDTV 720p
37.50	50.00	HDTV 720p
33.75	60.00	HDTV 1080i
28.13	50.00	HDTV 1080i

Main corresponding signals (Video, S-video mode)

Horizontal	Vertical	Signal
frequency (kHz)	frequency (Hz)
15.73	59.94	NTSC
15.63	50.00	PAL
15.63	50.00	SECAM
15.63	59.52	PAL60
15.63	50.00	N-PAL
15.73	59.95	M-PAL
15.73	59.94	4.43NTSC

Póññêèé Português Italiano Français Español Deutsch

Note

•Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.

•With some input signals, "Out of range" may appear even when the horizontal and vertical frequencies are within their permissible ranges. In this event, match the input signals to another frequency rather than those listed above.

•You can check input signals through "Information" on the FEATURES Menu screen. (See User's Manual (2/2))

•In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.

•All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.

÷–Œƒ

日 本 語

E-11