Fujitsu plasmavision user manual Adjusting Audio, Adjusting Treble Treble, Adjusting Bass Bass

ADJUSTING AUDIO

•You can make changes to all audio adjustment options in the AUDIO Menu. See Page E-20 for the basic operation procedures.

•The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any changes.

Adjusting Treble (Treble)

Press EFto make adjustments.

F: Stronger treble

E: Weaker treble

Press <to store.

Adjusting Bass (Bass)

Press EFto make adjustments.

F: Stronger bass	AUDIO Menu screen
E: Weaker bass
Press <to store.

Adjusting Volume Balance (Balance)

Press EFto make adjustments.

F: Shifts the volume balance towards the right.

E: Shifts the volume balance towards the left.

Press <to store.

Setting Loudness (Loudness)

Corrects the balance between bass and treble for easy listening even with weak volume.

Each time you press Eor F, one of the available choices appears in the following sequence:

On Off

Press <to store.

Note

•The screen display disappears if there is no operation within approximately 60 seconds.

•Depending on the model or the optional devices, some of the functions may not be available.

•The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.

•Depending on the type of signal, it may not be possible to make some of the settings or adjustments.

•Audio Input menu will not be displayed when “No Audio” is selected. (See P. E-36.)

E-28