Fujitsu plasmavision Adjusting the Black Level, Setting Detail Gradation, Setting 3D NR

PRECISION SETTING (for the U model)

• See BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS on page E-20. Even more advanced Sharpness adjustments can be made as required.

Adjusting the Black Level

Press Fto strengthen the reproduction of black. (Provides a picture quality with deep blacks.)

Press Eto weaken the reproduction of black.

Press <to store.

Setting Detail Gradation

Corrects the gradation of the light and dark areas of the picture.

Each time Eor Fis pressed, the setting is switched.

	On Off	Precision Setting Selection
Press <to store.		Screen
Setting 3D NR
This enables noise reduction processing with respect to the input signal noise level (reduces screen
flicker for more comfortable viewing).
Each time you press Eor F, the available choices appear in the following sequence.
Press <to store.
Setting CODEC NR
This enables noise reduction processing of mosquito noise or block noise generated when digital picture
signals are recorded or replayed.
Each time you press Eor F, the available choices appear in the following sequence.
Press <to store.

Note

•The screen display disappears if there is no operation within approximately 60 seconds.

•Depending on the model or the optional devices, some of the functions may not be available.

•The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.

•Depending on the type of signal, it may not be possible to make some of the settings or adjustments.

Póññêèé Português Italiano Français Español Deutsch English

中文

日 本 語

E-23