Fujitsu plasmavision user manual Putting Batteries in the Remote Control, Precautions

PUTTING BATTERIES IN THE REMOTE CONTROL

(1) To remove the cover, slide it outwards	(2) Place two AA batteries in the remote	(3) Close the cover until it snaps into place.
while pressing it down.	control. Make sure that the batteries are
	properly oriented.

PRECAUTIONS

To prevent malfunction, be sure not to apply any form of severe shock to the remote control.

To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or heating equipment.

Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.

Póññêèé Português Italiano Français Español Deutsch English

CAUTION

Be sure to use replacement batteries of the same type as the original ones.

When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country/ area.

Note

The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.

Do not use rechargeable batteries (Ni-Cd, etc.).

中文

日 本 語

E-5