Fujitsu plasmavision Display Section Back and Bottom Part, Back Bottom  / I power switch

Page 5

DISPLAY SECTION – BACK AND BOTTOM PART

Back

Bottom

/ I power switch

If this button is pressed when the power indicator lamp is off, the indicator lamp will light.

The power can be turned on and the standby mode selected by using the remote control or the control panel of the display. If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out.

*Power is still supplied to parts of the display even if the indicator lamp is off.

HDMI input terminal (VIDEO5 INPUT/HDMI) for the U model

Connect this terminal to the HDMI output terminal for DVD, etc.

RS-232C terminal (RS-232C)

This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.

RGB1 input terminal (RGB1 INPUT/DVI-D) for the W/U/A models

Connect this terminal to the PC’s display (digital RGB) output terminal. *The connection cable No.88741-8000 made by molex Inc. is recommanded.

Note

• The illustration of external appearance is for 42" model. Please acknowledge some differences in the actual product of other models.

Póññêèé Português Italiano Français Español Deutsch English

÷–Œƒ

日本語

E-5

Image 5

Contents Póññêèé Português Italiano Français Español Deutsch English ContentsConnecting the Display to External Equipment Checking AccessoriesFerrite cores Two big ferrite coresReference InstallationDisplay Section Front Side Display Section Front Part Names and FunctionsDisplay Section Back and Bottom Part Back Bottom  / I power switch Hdmi input terminal VIDEO5 INPUT/HDMI for the U model  RS-232C terminal RS-232C Video input terminal VIDEO1 Input  Power input terminal S-Video input terminal VIDEO2 Input  External speaker output terminal EXT SPDescription of Input Terminals Pin No SignalPin No Input signal Hdmi High-Definition Multimedia Interface English OptionsVertical frequency Hz Signal Main Supported SignalsMain corresponding signals RGB mode Display dots x lines Frequency kHz Frequency Hz HdmiRegulation SpecificationModel P42VHA40U P42HHA40U P50XHA40U P55XHA40U P63XHA40U Specification Precautions and Adjustment Methods Information Using the Remote Control *RGB input mode selector button Î E-15 &Video input mode selector button Î E-14 12Volume adjustment buttons Î E-13 CDEFAdjustment buttons Î E-19-E-35Precautions Putting Batteries in the Remote ControlUpper Lower Left Right Front Effective Range for the Remote ControlVCR or other external components See P. Î Example of Connection to External ComponentsDisplay bottom VCRItaliano DVD RECORDER/PLAYERÇais Español Deutsch Satellite Tuner Póññêèé Português Italiano Français Español Deutsch English Press on the remote control Turning the Power on and STAND-BYPress when the power is on Basic OperationsMuting the audio Adjusting the VolumeAdjusting the volume Press &to select the input Mode Selecting Input ModePress =to select the input Mode Ñol Deutsch English RGB Input ModePress -*to select the input mode Other Basic Operations Picture ModeConvenient Functions On-screen informationWatching Pictures on the Wide Screen Switching Between Screen SizesPress Press to select a desired Screen SizeAspect Ratio Screen SizeMenu Adjustment MenuPress Press to store Press when you finishPress Eor Fto select Picture Press Cor Dto select TintAdjusting the Picture Setting Picture Memory Setting Picture ModePrecision Setting for the U model Setting Detail Gradation Adjusting the Black LevelSetting 3D NR Setting Codec NRAdjusting the Color Temp Setting Image EnhanceSetting User Color Temp Chroma TransientReddish color Setting the Color FocusÇais Español Deutsch English Frame Mode Making the Progressive Scan SettingsMotion Setting Jaggies FilterAdjusting Screen Position Position Adjusting Screen Position and SizeAdjusting Screen Size Size Español Deutsch EnglishAdjusting Treble Treble Adjusting AudioAdjusting Bass Bass Adjusting Volume Balance BalanceAdjustment Other AdjustmentsFeatures setup screen has the following 4 options Adjustment Item Contents of Adjustments OperationOn Screen Menu Selecting the settings of Video/S-video Input terminal Setting the Input TerminalsSelecting the settings of D-SUB Input terminal ÑolSelecting input terminals Audio Input Other SettingsAuto Off-NO SIG Displaying white over entire screen White Screen Specifying RGB Input Signal Code Setting For mD-sub inputMinimizing phosphor burn-in Screen Orbiter For RGB Displaying System Status Information Setting Exhibition Mode Exhibition ModeInput Signal Video mode Input Sync. Signal type Press Eor Fto select Factory Initialization of User Adjustment ValuePress Cor Dto select the Yes Português Italiano Français Español DeutschBefore Obtaining Service Cleaning and Maintenance