Vidikron manual Vision 85 Rear Panel, Wired IR 3.5-mm, mini phono jack

Controls and Functions

Figure 2-2shows the Vision 85 rear panel.

RETURN	ENTER	DOWN	UP	LEFT	RIGHT		MENU	RATIO	STANDBY	ON
								ASPECT
RETURN	ENTER	DOWN	UP	LEFT	RIGHT		MENU	ASPECT	STANDBY	ON
								RATIO
HDMI
HDMI
60Hz-50 240V-100 IN AC				TRIGGER		IR	OUT 232-RS
				TRIGGER		IR	RS-232 OUT

AC IN 100-240V 50-60Hz

1 2 3 4 5 6

Figure 2-2. Vision 85 Rear Panel

1.POWER INPUT (100 to 240 VAC) Connect the Vision 85 to power here.

2.HDMI INPUT

An HDCP-compliant, digital video input for connecting the HDMI output from the VHD Controller.

3.BUILT-IN KEYPAD

Used to navigate the Vision 85 on-screen menus. Refer to Vision 85 Built-In Keypad on page 14 for more information.

4.12-VOLT (200 mA) TRIGGER OUTPUT (cylindrical, DC power supply-type jack) Connection for a retractable screen, screen masking or other, 12-volttrigger-activated equipment. Outputs +12 volts/200 mA when the projector is turned on.

5.WIRED IR (3.5-mm, mini phono jack)

Not used. To use an external infrared receiver or wired remote control with this projector, connect it to the IR input on the VHD Controller (see Figure 2-4).

6.RS-232C INPUT (RJ-11 female connector)

Connect the RS-232 output from the VHD Controller here, using the provided communication cable.

2.2

Vision 85 Rear Panel

Vidikron Vision 85 Owner’s Operating Manual 7