Vidikron 85 Home Theater Calibration Specifications, Industry-Standard Specifications, Dimensions

Page 96

Specifications

Table 7-1. Vision 85 Specifications (continued)

Brightness and Contrast	Cinema Standards Measurement System (CSMS)
(variable, depending on VAC	Specifications
calibration):	-	Brightness: 16.1 to 25.2 foot-Lamberts (fL)
	-	Contrast Ratio (variable, based on lens aperture setting):
		215:1 - 234:1
	These measurements are taken from the projector in a controlled, home
	theater environment. All measurements are made to ANSI/NAPM
	IT7.228-1997 specifications using the Photo Research PR-650
	SpectraColorimeter and Minolta LS-100 Luminance Meter, Video
	Essentials test DVD and a 1.3 gain, 72-inch wide screen. The projector is
	calibrated to a color temperature of 6,500K and has a minimum of 150
	hours of usage.
	The foot-Lambert (fL) is the unit of measurement used in commercial
	movie theaters to express image brightness at the screen surface. The
	Society of Motion Picture and Television Engineers (SMPTE) specifies
	16 fL as the target image brightness for film-based projectors using an
	open gate (without film in the projector). More importantly, today
	SMPTE specifies 12 fL as the target image brightness in Digital Cinema
	theaters. The foot-Lambert measurement is dependent on screen size,
	screen gain and projector light output.
	Home Theater Calibration Specifications
	-	Light Output: 430 - 648 ANSI Lumens
	-	Contrast Ratio (variable, based on lens aperture setting):
		215:1 - 234:1
	These specifications are obtained by calibrating the projector as
	described above for CSMS measurements.
	Industry-Standard Specifications
	-	Light Output: 1600 ANSI Lumens
	-	Contrast Ratio (variable, based on lens aperture setting):
		2700:1 - 3350:1
	These are typical projector brightness and contrast specifications found
	in most companies’ sales literature. Vidikron includes these
	measurements in its literature to allow for direct comparison with other
	manufacturers’ projectors. These measurements are typically taken at
	9,000K to 13,000K to get expected performance data when the projector
	is used in professional, commercial and industrial displays.

Power Requirements:	100 to 240 VAC (auto-sensing), 50/60 Hz, 375 Watts

Operating Environment:	40°F to 95°F (5°C to 35°C), 0% to 90% humidity
	(non-condensing)

Dimensions:	See Figure 7-1

Weight (without lens):	50 lbs. (22.68 kg)

Regulatory Approvals:	Complies with FCC, CE C-Tick

Limited Warranty:	Projector: Two (2) years parts and labor from the date of delivery
	to the end user.
	Lamp: 1000 hours or six (6) months, whichever comes first.

Specifications are subject to change without notice.

84	Vidikron Vision 85 Owner’s Operating Manual

Image 96

Contents 1080p DLP Projectors Page TWO Year Limited Warranty For Projectors, Video Processors and ControllersEffective Warranty Date Vidikron Safety Precautions 1Table of Contents Anamorphic Lens Installation and Adjustment OperationMaintenance and Troubleshooting SpecificationsSerial Communications Table of Contents 1List of Figures Typical Test Pattern for Adjusting Sharpness About This Manual This ManualUsing This Manual They also provide supplemental informationPerformance or cause a malfunction If you need Turn toDescription, Features and Benefits Optional Accessories Vision 85 at a Glance Vision 85 Front/Top/Side/Bottom/Rear ViewVertical Lens Shift Wired IR 3.5-mm, mini phono jack RS-232C Input RJ-11 female connectorVision 85 Rear Panel VHD Controller Front Panel VHD Controller Front PanelComponent Video RCA connectors VHD Controller Rear PanelHdmi 1 / Hdmi 2 Digital InputsPower Input 100 to 240 VAC Video 1 / S-VIDEOVolt 750 mA Trigger Outputs ComLink RS-232 OutputVision 85 Remote Control Unit VHD Controller/Vision 85 Remote ControlOn / OFF ENT EnterCursor Buttons Memory Preset Buttons ISF NT Night CustVideo VID 1 2 / S-VID 2 5 S-VideoVision 85 Built-In Keypad Not usedRemote Control To install batteries in the remote controlOperation Installation Quick Setup Installation OverviewStep Procedure For Details, Refer to If installing a Vision 85/CineWide or Vision 85/CineWideInstallation Considerations Projector Installation OptionsInstallation Type Projector Calibration Digital 1080i or 1080p signalsThrow Ratios for the Vision 85 Series Throw Range Throw RatioProjector Model VisionCeiling Installation Floor InstallationPosition Folded Optics Installing the Optional CineWide Lens Mount 6shows the Vision 85/CineWide with AutoScope motor assembly Vision 85 with Ceiling Mount Adapters/Projector Stands AutoScope Lens Motor Installation 85/CineWide Vision 85/CineWide with Lens Base PlateAdjusting the Projection Mounting the VisionFloor Mounting Upright AngleConnector Panel Access Connections to the Vision 85 and VHD ControllerVHD Controller Connecting Source Hdmi Connections See FigureController Hdmi Source HD-DVD/BD/DVD Player or HD Tuner withDigital DTV RGB or Component Video Connections See Figure 12. Digital DTV RGB or Component Video ConnectionsAnalog Computer RGB Connections See Figure Personal ComputerComposite/S-Video/Component Video Connections See Figure DVD Player, VCR Satellite Receiver Laser Disc etcConnecting a PC or Automation System to the VHD Controller 15. RS-232 Control System ConnectionOutputs to External EquipmentConnecting an External IR Receiver to the VHD Controller 17 -volt Trigger Output Connection from ProjectorTurning on the Power Power sourceAdjusting the Picture Orientation Primary Lens AdjustmentsInstalling and Adjusting the CineWide Anamorphic Lens Anamorphic Lens Installation Adjustment Vision 85/CineWideAdjusting the Lens Height Y Anamorphic Lens Top View Adjustment Vision 85/CineWide withAutoScope Attach Lens Mounting Assembly to Lens Motor Carriage Plate 22. Attaching the Anamorphic Lens to the Lens Adapter RingAdjusting the Horizontal X Lens Position Installation Anamorphic Lens Top View Adjusting the Geometry Using the On-Screen Menus 4OperationISF Presets ServiceInput Source Aspect RatioMain Menu Input SourceAspect Ratio Aspect Ratio Settings Aspect Ratio DescriptionPicture Surface, eliminating the black bars.Perform the adjustments in the order listed here Typical Pluge Pattern for Adjusting BrightnessGray Yellow Cyan Green Magenta Red Blue Gray Yellow Cyan Green Magenta Red Blue Typical Test Pattern for Adjusting Sharpness Input PositionISF Presets InformationYou must enter a passcode to access the Calibration menu CalibrationGain/Offset Refer to ISF Night Display Color, above Service Code Standard Vision HD/RGB 1 and HD/RGB 2 Color Space Select Auto, RGB or YUVOperation On-Screen Menus for 1080i Digital or 1080p Signals Vidikron Video Picture Adjust Color Temp VAC Iris Lamp PowerKey Auto ContrastOperation Picture Adjust Advanced Mpeg NREffects of Primary Color Hue Adjustments White Balance White BalanceOptions Lamp Hours read-onlyRefer to Lamp Hours onOrientation Refer to Adjusting the Picture Orientation on Always set this option to On. Doing otherwise may disruptOperation 5Maintenance and Troubleshooting Lamp ReplacementTroubleshooting Tips Troubleshooting ChartSymptom Possible Causes Solution To Table Maintenance and Troubleshooting Serial Command Syntax RS-232 Connection and Port ConfigurationSerial Commands Command Value Description Min/max Stored?Brightness Command Parameter Value Description Min/max Stored? Hdinputres YES Enter keySerial Communications Vision 85 Specifications Home Theater Calibration Specifications Industry-Standard SpecificationsPower Requirements DimensionsVHD Controller Specifications Vision 85 Dimensions Vision 85/CineWide with AutoScope DimensionsPage Vidikron