Vidikron 85 manual Hdinputres YES, Enter key

Serial Communications

Table 6-1. Serial Commands (continued)

Command	Parameter		Value		Description
	(min/max)		Stored?
		Miscellaneous Commands
BKGND	-100/100		YES	Sets the background color for 4:3 aspect ratio
				(-100 = black; 100 = white)
BKGND?	NA		NA	Returns background setting value
DATE?	NA		NA	Returns projector manufacture date
HDINPUTRES	NA		YES	Sets YPbPr input resolution and refresh rate
				for HD1/HD2, as follows:
				0	= 480i
				1	= 480p
				2	= 576i
				3	= 576p
				4	= 720p / 60 Hz
				5	= 1080i / 60 Hz
				6	= 720p / 50 Hz
				7	= 1080i / 25 Hz
				Any other value = Auto
HWVER?	NA		NA	Returns hardware version number
INRES?	NA		NA	Returns input resolution
LENS1?	NA		NA	Returns Lens 1 configuration
STATUS	NA		NA	Returns current operating status (power,
				input source, input resolution and input
				aspect ratio)
SWVER?	NA		NA	Returns software version number
TRIGGER	1/3		YES	Assigns trigger to currently-selected aspect
				ratio

The following serial commands are meant to emulate buttons on the remote control or VHD Controller front panel. Each button has its own serial command, so effectively it is as if you were using the IR remote only you’ll be doing so via serial commands. These commands provide active OSD responses just like the IR remote.

DOWN	NA	NA	Down-Arrow ( ) key
ENTER	NA	NA	ENTER key
LEFT	NA	NA	Left-Arrow ( ) key
MENU	NA	NA	MENU
RIGHT	NA	NA	Right-Arrow ( ) key
UP	NA	NA	Up-Arrow ( ) key

Vidikron Vision 85 Owner’s Operating Manual 81