Teac 7250, HDRM user manual SET-UP Process

THE SET-UP PROCESS

Assuming you have connected a HDMI cable or Component Video cable between your set-top box and you flat panel television screen, the following will automatically appear when using this product for the first time. If no screen appears, unplug the HDMI cable and connect again. This will force the set- top mode into this mode (i.e. it’ll automatically switch).

Every 10 seconds, the video screen mode will change to a lower resolution. If you can see this screen, then your television screen accepts a higher level of high definition vision.

Press the key to accept the resolution provided by the set-top box.

Once you have selected the resolution, the set-top box will ask you to accept it.

You must press the blue key to accept your selection.

The following step-by-step screens will now appear.

The following screens are presented to you to complete the set-up process.

Press the key to go to the next screen.

Move the joystick to select your type of television screen.

Then press the key to go to the next screen.

9