Rear Panel
Rear Panel
Figure 4 illustrates the rear panel of the DVD Duplicator unit.
cooling fans
AC voltage selector
AC IN power connector
cooling fans
Figure 4. Rear Panel of the DVD Duplicator Unit
cooling fans:
AC voltage selector: Use this switch to select either 115VAC or 220VAC.
Caution: Before you turn on the power to the DVD Duplicator, make sure the correct voltage is selected. Otherwise, you risk damage to the unit. The default setting is 115VAC.
AC IN power connector: Connect the included AC power cable to this input connector. Plug the other end of the power cable into a
Caution: Do not attempt to bypass the grounding plug. Otherwise, you risk electrical shock or damage to the unit.
TEAC 1x10 DVD Duplicator User’s Manual | 5 |