Basic Operation
Basic Operation
This section explains the basic operation of the DVD Duplicator.
Copying from the Optical (DVD) Source Drive
1.Place a source disc in the disc tray of the source drive.
2.Switch to the Copy function by pressing the SET button.
3.Place a blank DVD±R disc into as many of the target drives as you desire, then press the RUN button to start copying.
You do not need to insert a DVD disc into every available target drive. You can make fewer copies if you prefer. The internal controller will automatically detect inserted discs and issue the record command to only those target drives that contain a blank disc.
When the copy operation is complete, the DVD disc in each of the target drives will be ejected automatically.
Note:
❑With the default setting, after a source disc has been successfully copied, the DVD Duplicator automatically ejects the target DVD discs.
❑With the default setting, if the copy operation fails, the failed target DVD disc remains in the target drive. To remove the failed DVD disc, press the eject button on the target drive and retrieve the disc. Press the eject button again to retract the disc tray.
8 | TEAC 1x10 DVD Duplicator User’s Manual |