Teac DVW-D110H user manual Using the DVD Duplicator, Setup

Page 15

Setup

Chapter 2. Using the DVD Duplicator

This chapter explains how to set up the DVD Duplicator, as well as basic operation and menu functions.

Setup

1.Select a well-ventilated area for the DVD Duplicator. Carefully remove the DVD Duplicator unit, AC power cord and user’s manual CD-ROM from the shipping box.

Note: Please keep the original box and packaging materials for use in the event of future storage or transportation of the unit.

2.To ensure that the unit is properly balanced, place the DVD Duplicator on a flat surface. Extend the Duplicator’s feet outward at each its four lower corners.

For more information, refer to the section “Front Panel” on page 3.

3.Connect one end of the included power cable to the back of the DVD Duplicator. Connect the other end of the power cable to a three-prong receptacle AC outlet.

Caution: Do not attempt to bypass the grounding plug. Otherwise, you risk damage to the unit and electrical shock.

4.Turn on the power to the DVD Duplicator by pressing the power button on the lower right-hand side of the unit.

During initialization, the DVD Duplicator performs a self-test in which the unit’s internal buffer is tested, source and target drives are detected, and the LCD display is tested. Once the initialization is complete, the DVD Duplicator is ready for use.

The LCD initially displays the Test function by default.

Figure 5. Test Function on LCD Panel

TEAC 1x10 DVD Duplicator User’s Manual

7

Page 14 Page 16
Image 15
Page 14 Page 16
Contents DVW-D110H Page Safety Precautions Copyright and Trademark InformationPiracy Statement Introduction About This ManualTable of Contents Appendix A. List of Functions List of Figures Teac 1x10 DVD Duplicator User’s Manual Introduction DVD Duplicator Package Contents Illustrates the front panel of the DVD Duplicator unit Front PanelLCD Control Panel Illustrates the rear panel of the DVD Duplicator unit Rear PanelRear Panel Setup Using the DVD DuplicatorCopying from the Optical DVD Source Drive Basic OperationInsert a source DVD into the DVD-ROM drive Loading Data to and Copying from the Hard Disk Source DriveLoading Data to and Copying from the Hard Disk Source Drive DVD Duplicator Functions Operation Mode FunctionsLoad EraseSetup Mode Functions DVD Writing Speed Advanced SetupCD Writing Speed DVD Reading SpeedSkip Read Err Advanced Mode FunctionsChoose Source Disc CounterShow Disc Info CD Writing WayDVD Writing Way Check TRK LENSupport UPC/ISRC Enable Send OPCShow Exe. Time Auto Exe. TimeCD Gigarec Rate Disable LO ChangeBoot Delay Time Partition SizeAppendix A. List of Functions Error Code Definition Appendix B. LCD Error Code DefinitionsHandling Discs Appendix C. About DVD and CD DiscsEjecting the Disc Tray Loading and Ejecting DiscsDVW-D110H Appendix D. SpecificationsLimited Warranty Appendix E. Technical Support and WarrantyExclusion of Damages Limited Warranty
Top Page Image Contents