Rear Panel

	1	5
		RS-232 OUT
12V FUSE
				RGB VIDEO OUTPUT						VIDEO INPUTS
		RS-232 IN	V	H	B	G	R	PASS THROUGH	Y	Pr	Pb S-VIDEO COMPOSITE
MASK	SCREEN

12V TRIGGER

RUNCO INTERNATIONAL

UNION CITY, CA

AC 120V 60Hz, 15W

MADE IN USA

1.12v Fuse

This fuse protects the 12v outputs from the MASK and SCREEN jacks.

(Screen Fuse: 5mm x 25mm, AGC, 0.5A 250V Fast Acting, 250V, Fast Blow)

2.Mask

This is a 12V output that is used to trigger masking on screens that have that capability. (For use on motorized screens only).

3.Screen

This is a 12V output that is used to trigger the screen to drop.

(For use on motorized screens only).

4.RS-232 In

This is for systems using serial (RS-232) to control the PL-50HDX system.

5.ComLink to PL-50HDX Panel (Mandatory) Use phone type cord for “auto” control of the PL-50HDX Panel.

6.RGB OUTPUT

This is the main output of the PFP Controller. The RGB Signal goes directly to the display; If component is used through the pass-through, then only the R (Pr), G(Y) and B(Pb) jacks will be active. Individually, the jacks are: V=vertical sync, H=horizontal sync, B=Blue, G=Green, R=Red.

Note: You may input Component HDTV into the

15-pin Pass-thru. Please select Component HD on the menu of the Controller.

7.Pass-through

Anything input to this port will by-pass the processing of the PFP Controller and be sent straight to the display. This is useful for computer graphics and HDTV signals which do not require processing.

8.Component Input

This is the input for component video from sources such as DVD players.

Note: The component output from a DTV decoder or a progressive-scan DVD cannot be used with this port; it must be input to the Pass-through port.

9.S-Video Input

This is the input for S-video from sources such as Satellite receivers, S-VHS VCR’s and DVD players.

10.Composite Video Input

This is the input for Composite video from sources such as Laser disc players, VCRs and other miscellaneous video sources.

11.Power Input

Plug in main power here.

12.115 VAC Fuse

This is the main AC input fuse.(Main Fuse: 5mm x 20 mm, 500mA, 250v, Slow Blow)

13.Main Power Switch

Disconnects or applies main power to the processor.