RS-232 Commands

COMMAND	PARAMETER (min/max)	Value stored?	DESCRIPTION

ON	NA	NA	Turns Controller on
OFF	NA	NA	Turns Controller off
DISPLAY	0/4	YES	Adjusts the brightness of the
			front panel display
COMPOSITE	NA	YES	Selects the Composite Video
			Input
SVIDEO	NA	YES	Selects the S-Video Input
COMPONENT	NA	YES	Selects the Component Video
			Input
HDCOMPONENT	NA	YES	Selects the Component Input
HDRGB	NA	YES	Selects the RGB input
ANAMORPHIC	NA	YES	Selects the anamorphic aspect
			ratio
STANDARD	NA	YES	Selects the standard (4:3)
			aspect ratio
LETTERBOX	NA	YES	Selects the letterbox aspect ratio
VIRTUALWIDE	NA	YES	Selects the virtualwide aspect
			ratio
TINT	-127/127	NO	Sets a value for tint
COLOR	-127/127	NO	Sets a value for color
AGCCOLOR	0/1	NO	0=Disable Color AGC
			1=Enable Color AGC
BRIGHTNESS	-127/127	NO	Sets a value for brightness
CONTRAST	-127/127	NO	Sets a value for contrast
AGCCONTRAST	0/1	NO	0=Disable Contrast AGC
			1=Enable Contrast AGC
SHARPNESS	0/255	NO	Sets a value for sharpness
CHROMAHIGH	0/127	NO	Sets a value for high-frequency
			chroma edge enhancement
CHROMALOW	0/127	NO	Sets a value for low-frequency
			chroma edge enhancement
LUMAHIGH	0/127	NO	Sets a value for high-frequency
			luminance edge enhancement
LUMALOW	0/127	NO	Sets a value for low-frequency
			luminance edge enhancement
!STORE	NA	YES	Stores the current set of values
			(all values) into non-volatile
			memory
!RESTORE	NA	YES	Restores the stored values
!FACTORY	NA	YES	Restores all values to factory
			default levels
!STATUS	NA	NA	Asks the Controller to provide
			the hardware information, cur
			rent values and system status to
			the automation system
!ECHO	NA	NO	Enables the Controller to echo
			back commands and values to
			the automation system
!NOECHO	NA	NO	Disables the Controller's
			character echoing
!INSTALLMODEOFF	NA	NA	Disables the Installation menu
			(removes it from the main menu)
!INSTALLMODEON	NA	NA	Enables the Installation menu
			(enables it on the main menu)

RS-232 COMMANDS

DESCRIPTION

!STATUS