Sanyo DSR-3506P manual MENU-SPECIFIC Settings Recording Conditions SET, Setting the auto delete

2MENU-SPECIFIC SETTINGS

5. RECORDING CONDITIONS SET

Set the permission for overwriting to recording areas or the remaining-space warning level as described below.

1

2

3

4

5

Setting overwriting permission for the normal recording area

When the normal recording area has been filled with data, this setting dictates whether recording will be stopped or continued by overwriting the recorded images currently stored on the hard disk.

1 Select “OVERWRITE” for normal recording area from the pull-down menu on the screen.

[Settings] (‹ indicates default setting.)

Setting	Description
	When the normal recording area has been filled with
‹ON	data, overwriting from the beginning of this area will
	start automatically.
OFF	Recording is stopped when the normal recording area
	has been filled with data.

Setting overwriting permission for the alarm recording area

When the alarm recording area has been filled with data, this setting dictates whether recording will be stopped or continued by overwriting the recorded images currently stored on the hard disk.

2 Select “OVERWRITE” for alarm recording area from the pull-down menu on the screen.

[Settings] (‹ indicates default setting.)

Setting	Description
	When the alarm recording area has been filled with
‹ON	data, overwriting from the beginning of this area will
	start automatically.
OFF	Recording is stopped when the alarm recording area
	has been filled with data.

Setting the remaining-space warning level

In situations where the overwrite setting for the normal
recording area and the alarm recording area is “OFF”, you
can have the unit issue a warning as soon as the
remaining space in either of these areas reaches a specific
level. (JP. 21)
The following section describes how to set the level at
which the warning will be issued.
(This level is common for the normal recording area and	NETWORK SETTINGS
the alarm recording area.)

3 Set the remaining-space warning level from the pull-down menu on the screen.

Setting range: 1% to 10% (in units of 1%)

Setting the auto delete

You can set the storage period for images. When the set period has expired, the corresponding data will be automatically deleted.

4 Set “AUTO DELETE” from the pull-down menu on the screen.

[Settings] (‹ indicates default setting.)

Setting	Description
‹OFF	Auto delete is not to be set
1 -99	You can set the storage period for recorded data
DAYS	within a range of “1 DAY” - “99 DAYS” (full days).

zIf the overwrite setting for the normal recording area and the alarm recording area is “ON”, the remaining- space warning level will be displayed as “**” and setting will not be possible.

5 Click [SAVE].

The new setting is saved.

14 English