1DVR VIEWER
The DVR Viewer is a program designed specifically for DVRs. It can be used to play back image and sound data that has been copied onto media such as computer hard disk drives, CompactFlash cards.
The DVR Viewer can be downloaded from the Sanyo website at the URL given below.
Sanyo website URL:
http://www.sanyosecurity.com
zWhen playing back sound data, you will need Version 1.5 or later.
Operating environment
The following operating environment is required in order to use the DVR Viewer.
zApplicable operating system: Windows 98, 98SE, Me, NT4.0, 2000, XP
zApplicable computer: PC/AT compatible computer running one of the above operating systems
zIf an older version of DVR Viewer or ActiveX is installed, remove them from [Control Panel] → [Add or Remove Programs] in advance.
Installing the DVR Viewer
Install the DVR Viewer by the following procedure.
1 Starting the installation wizard
2 Selecting the language settings
Select the display language for the software (English) in the [Choose Setup Language] window and then click [OK].
3 Starting the installation
Click [Next>] in the [Welcome to the InstallShield Wizard for DVR Viewer] window to start the installation process.
4 Choosing the destination location
Check that the destination folder shown in the [Choose Destination Location] window is correct, and then click [Next>].
If you would like to change the folder, click [Browse...] and specify the desired folder.
DVR VIEWER
5 Starting copying of files
Check that all the settings shown are correct, and then click [Next>]. Copying of files will then start. If you would like to change any of the settings, click [<Back].
6 Completion of installation
When the installation is complete, the [Maintenance Complete] window appears. Click [Finish].
40 | English |