Sanyo DSR-3506P manual Set Duration, Click Browse, Click Start, Click OK in the pop-up window

Page 33

2WATCHING IMAGES

3 Set “DURATION”.

The duration for images to be saved to the PC should be set in units of one minute.

4 Click [BROWSE].

A dialog box for selecting save location will be displayed, and a suitable location should be set.

zIt is also acceptable to input a location for saving directly into “DESTINATION FOLDER”.

5 Click [OK].

The setting menu will close and the screen will return to the condition for procedure 2 above.

The “DESTINATION FOLDER” location is displayed.

6 Click [START].

(1)The saving process begins.

The elapsed save time and the current save image are displayed on screen.

The elapsed save time will be incremented as the save progresses.

Elapsed save time

„To cancel a save operation

Click [CANCEL].

(2)A pop-up window will be displayed when saving has been completed.

The final still image from the save process will be displayed.

NETWORK

OPERATION

7 Click [OK] in the pop-up window.

The setting menu will close and the screen returns to the condition for procedure 2 above.

Folders as shown below will be created within the folder set in procedure 4, and within these folders, images are stored with numbers assigned automatically.

DVR00001

 

 

 

IMG00001

 

 

 

 

000001.JPG

 

 

 

 

 

(1)

 

 

(2)

 

 

 

 

000002.JPG

 

 

 

 

 

 

 

 

 

 

 

 

000003.JPG

 

 

 

 

 

 

 

 

DVR00002

 

 

IMG00001

 

 

 

000001.JPG

 

 

 

 

 

 

 

 

 

 

 

 

 

 

000002.JPG

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

000003.JPG

 

 

 

 

 

 

 

 

 

(1)The folder “DVR00001” is created.

(2)Within this folder, folders are created in sequence starting with “IMG00001”. Images are stored in each folder.

32

English

Image 33
Contents Page Contents Network Control Function Network settingsOperations possible with PC control Saving and playing back soundSetting Internet Options Installing DVR ViewerNetwork Control Function Click the Security tabClick Network Connections Click PropertiesClick OK Preparing for Network Control Enter a password for verification purposesControlling from a PC Launch the PC’s web browserEntering the operation screen Preparing for Network ControlWhen control rights are switched to Messages displayed when connectedWhen control rights are switched to the unit Controlling from the unitOperation panel Setting buttonsChannel and screen selection buttons Playback buttonsMaking menu selection SettingsClick the button on the operation panel Main Menu screen is displayedMenu structure SettingsMENU-SPECIFIC Settings Clock SETSummer Time SET/EXT. Clock SET Saved or modified settings are stored MENU-SPECIFIC Settings Holiday SETRecording area reset MENU-SPECIFIC Settings Recording Area SETTotal capacity display Area-specific capacity displaySetting overwriting permission for the alarm recording area MENU-SPECIFIC Settings Recording Conditions SETSetting the remaining-space warning level Setting the auto deleteSetting the picture quality for recording MENU-SPECIFIC Settings Normal REC Mode SETSetting audio recording Setting the recording rateUse the above procedure to set up to four program patterns MENU-SPECIFIC Settings Program REC SETSelect Program from the pull-down menu on the screen Select from P-1 through P-4„ Performing timer recording MENU-SPECIFIC Settings Timer SET„ Overlapping of timer reservation times „ Setting a timer for over 24-hours continuous recordingSetting alarm recording MENU-SPECIFIC Settings Alarm REC Mode SETSetting the alarm interleave Set the recording conditions for alarm recording as followsSetting pre-alarm recording MENU-SPECIFIC SettingsDefault setting A15 FPS SettingsExternal alarm detection Setting alarm triggersDisplay SET Motion sensor detectionSelect on or OFF for the alarm buzzer MENU-SPECIFIC Settings Buzzer SETNew settings are saved To cancel sounding of a buzzer on the PCChange the settings as required MENU-SPECIFIC Settings HDD SETNetwork SET MirroringUse between 4 and 8 alphanumeric characters for passwords Password SettingNetwork settings or modifications are saved RS-485 SETPower FAILURE/USED Time MENU-SPECIFIC Settings Mask SETSetting is saved Initialized RecordAlarm recording Timer recordingPre-alarm recording Recording ImagesScreen display items Recording ImagesNormal Recording Mode Alarm Recording Mode10Connection user Watching Images Watching live images during playbackPlaying back recorded images Performing operations in play mode Watching ImagesSpecifying the number of screens to display Live mode image Multi channels Play mode image 1 channel Adjusting the image and audioAlarm PRE-ALRAM Normal Archive Settings for downloading live images to a PC12SPEED in the play mode screen only Save setting items are displayedSet Duration „ To cancel a save operationClick Browse Click StartSearch for images using the search mode screen Search ModeBasic operation Search menuAlarm Search Alarm Thumbnail SearchOperations in Search Modes Archive Area Search Operations in Search Modes TIME/DATE SearchSelect 3. TIME/DATE Search from the Search menu Click PreviewSetting motion sensor detection conditions Operations in Search Modes Motion Detection SearchSelect 5. Motion Detection Search from the Search menu Copying to the archive area Saving Recorded ImagesClick Input the number of images into HOW ManyDownloading to a PC Saving Recorded ImagesSelect the Audio Click OK Specify a location for storing the dataImage viewer screen Installing the DVR Viewer DVR ViewerOperating environment Opening DVR Viewer Opening and closing DVR ViewerClosing DVR Viewer Menu barClick Open O in the File F menu Opening filesToolbar Alternatively, click the icon on the toolbarMain window Viewing imagesThumbnail window Control panel JPTOP Prev11IMAGE Number To print the image in the main window Printing imagesTo print thumbnail images To print several images all at once
Related manuals
Manual 112 pages 54.62 Kb