Sanyo DSR-3506P manual MENU-SPECIFIC Settings Normal REC Mode SET, Setting audio recording

2MENU-SPECIFIC SETTINGS

6. NORMAL REC MODE SET

Set conditions for normal recording and timer recording as described below.

1

2

3

4

5

Setting the picture quality for recording

Set the picture quality for recording to the normal recording area as follows.

1 Select “PICTURE QUALITY” from the pull-down menu on the screen.

[Settings] (‹ indicates default setting.)

Setting	Description
SUPER FINE	Super Fine
FINE	Fine
‹ENHANCED	Enhanced
NORMAL	Normal
BASIC	Basic

Setting audio recording

Audio can be recorded together with images when performing normal recording.

Note, however, that since this audio data will also be stored in the normal recording area, the recording time for this area will be reduced.

2 Select “AUDIO RECORDING” from the pull-down menu on the screen.

[Settings] (‹ indicates default setting.)

	Setting	Description
	ON	Audio will be recorded.
‹OFF		Audio will not be recorded.

zAudio recording can only be specified when the recording rate is A60 to A1 FPS.

Setting the recording rate

Set the recording rate for normal recording as follows. (Default setting: A15 FPS)

3 Select “REC RATE” for normal recording from the pull-down menu on the screen.

Audio recording	A60, A30, A20, A15, A10, A7.5, A6, A5,
	A4.286, A3.75, A3.333, A3, A2.727, A2.308,
is carried out
	A2, A1.667, A1.429, A1.25, A1.111, A1
Audio recording	0.5, 0.333, 0.25, 0.2, 0.1, 0.05, 0.033
is not carried out

The letter “A” will be displayed in front of recording rates that can be set for audio recording.

Selecting setting values

Image resolution is determined by the product of picture quality and recording rate. The higher the picture quality and the faster the recording rate, the better the image resolution; however, as higher resolution requires more storage capacity, the recording time will be reduced accordingly.

zThe recording rate will be limited between A30 and 0.033 FPS when the setting for pre-alarm recording is “ON”.

zThe recording rate for timer recording should be set separately using the TIMER SET menu. (JP. 17)

4 Select “REC PROGRAM GROUP” from the pull-down menu on the screen.

Select OFF, P-1, P-2, P-3, or P-4.

zSettings for program groups should be made separately as described in “7. PROGRAM REC SET”. (JP. 16)

5 Click [SAVE].

The new setting is saved.

English 15