Zenith L20V54S warranty Commercial Mode Setup, G E 4

Page 41

Commercial Mode Setup

This page provides an overview of the TV configuration. See the pages listed below for more specific, detailed instructions at each step; how to access and use the Installer menu etc.

*Note 1: Disconnect all Aux inputs. Under certain conditions, Auto Program (Channel search) is disabled if there is an Aux input active.

Overview: Commercial Mode Setup Procedure

1.Set Installer Menu Items

(Enter Installer Menu, see page 43 for detailed instructions.)

a. Set Installer menu item 117 FACT DEFAULT, to 001 and press ENTER. (This clears all installer menu items, custom settings, channel labels/icons and reloads the factory default settings.)

b. Set Item 003 BAND/AFC.

 

- Broadcast: set to 000.

- HRC: set to 002

- CATV: set to 001.

- IRC: set to 003

c. Set item 028 CH OVERIDE to 001. This allows access to Auto Program, Channel Labels and Channel List options in the Channel Menu.

d. Set other particular installer items that affect your TV programming network. See pages 46 - 51.

e. After all required installer menu item settings have been adjusted, press ENTER on the remote to remove Installer Menu.

2.Set Up TV Features

(See Picture, Sound, Setup menus etc. See TV Clonable options list on page 52.) Installer Note: Some TV features will have to be set up after running Auto Program. An example is Digital Font options. This feature is not available until digital channels are found in the channel scan. Set up Digital Font options after Auto Program finds a digital channel with digital captions. Do this before running 2-5-5 + Menu.

3.Run Auto Program

(Search for all available channels.) Go to the Channel menu and access the Auto Program option, follow on-screen instructions.

a. Edit Channel Scan. In the Channel Menu, access the Channel List menu.

• Delete channels per your system requirements: do you want to delete any free channels so the guest cannot access them?

• Add familiar Channel Icons like ABC, CBS, NBC etc. to the channel on- screen display. Add identifiable labels for the end user to readily know what common networks are available. In the Channel menu, select the Channel Label option, follow instructions on the bottom of the screen.

4.Transfer TV Setup to Controller Box: 2-5-5 + Menu

After the TV channel scan has been edited and channel label icons added, enter the Installer menu. Once in the Installer menu, press 2-5-5 and MENU on the remote. This transfers the TV setup to the internal controller box. *Note: Only do 2-5-5 + MENU once or TV setup may be corrupted.

TV scans available channels and exits menu when transfer to controller is complete.

5. Perform Adding Custom Channel Labels: 2-5-4 + Menu Mode

Enter Installer menu, press 2-5-4 and Menu. Add your own custom labels to the channel on-screen displays. (See page 53.) To remove menu press MENU. *Note: 2-5-4 + MENU can be performed more than once.

Verify TV Setup

At this point, verify that the channel lineup, channel icons and custom labels are correct. Make sure the TV features are set per your requirements.

Set item 028 CH OVERIDE to 000 to lock the channel scan. After the preceding has been completed, the Master TV setup is ready to be copied to the LT2002 Clone Programmer, see next page.

L20V54S PTC INSTALLER MENU

 

 

000

INSTALLER SEQ

000

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

UPN

000-000-000-000

 

FPGA 09F1

 

 

 

 

PTC V1.00.000

 

CPU V1.01.00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L20V54S Installer Menu

 

 

 

 

 

 

 

 

 

 

 

 

 

 

117

FACT DEFAULT

 

00X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

003

BAND/AFC

 

00X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

028

CH.OVERIDE

 

001

 

 

 

 

 

 

 

 

 

 

 

 

 

 

073

CH. NOT AVBLE

 

001

 

 

 

 

L20V54S Installer Menu Items

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIGITAL 19-3

ANALOG 2

 

 

 

MONO STEREO

SAP

WXYZ

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MONO

 

 

 

 

 

 

 

 

 

 

 

 

 

WXYZ

Custom Channel Label ‘WXYZ’ created in 2-5-4 + Menu Add Channel Label Mode

028

CH. OVERIDE

000

After TV setup has been verified,

set item 028 Ch Overide back to 000.

*Note: Default setting for Aux sources is to be active in the installer menu. The Aux sources will appear between the highest Analog and lowest Digital channel number with Channel Up/Down. If the Aux sources will not be used, it is advisable to set them to 000 (Off) before doing 2-5-5 + Menu. After doing 2-5-5 + Menu, the only way to turn the Aux source off so they will not appear in the channel scan, is to go to the Channel Bank menus and turn each Aux source off by selecting ‘Normal Delete’.

Refer to installer items: 35, 39.

P A G E 4 1

Page 40 Page 42
Image 41
Page 40 Page 42
Contents B l e o f c o n t e n t s Installer quick setup guide Installation and Operating Guide WarrantySerial no Record the Model NumberMillbrook Drive Lincolnshire, IL 60069, USA. Phone ComplianceNEC National Electrical Code Important Safety InstructionsTable of Contents Setup Checklist Audio / Video 1, 3 Installation/Connections OverviewTypical Pedestal Type Mount with Swivel Bracket Vesa Standard TV MountsMini glossary Antenna HookupConnect an off-air antenna to the LCD TV/Monitor G E 1 Cable Service HookupConnect cable service to the LCD TV/Monitor Locate the Antenna/Cable jack on the back of the VCR Antenna & VCR HookupConnect antenna and a VCR to the LCD TV/Monitor Connect cable service and a VCR to the LCD TV/Monitor Cable Service with VCR HookupPillow Speaker Hook Up Controlling the TV with Mechanical SwitchesControlling the TV with Serial Data Pillow Speaker InterfaceAC Power Cord Remote Control Sensor and/or Alarm mode Using the front control panel to operate the LCD TV/MonitorFront Panel Controls TV OperationDescriptions of the menus and on-screen displays On-Screen Menus OverviewInfo Other Menus & On-Screen DisplaysUser Remote Control Key Functions Installer Remote Control Key Functions Auto Program Channel Search Removing unwanted channels Channel ListAfter the channel search, remove unwanted channels Operating the Channel Label Menu Channel Labels SetupChannel Labels Setup On-Off Timers Setup Clock SetupEnter button Daylight Saving Time Zone SettingsInstaller can set the Time Zone Choose a language for the on-screen menus Menu LanguageOK Enter button ChipUse the Up/Down/Left/Right arrows buttons to choose Set up the menu options for Tvpg RatingSet up the menu options for Mpaa Rating To highlight the Setup menuPress the OK Enter button Use the Up/Down/Left/Right arrows buttons to chooseSet up the menu options for Canadian French Rating Set up the menu options for Canadian English RatingG E 3 Canadian English RatingsCaption Menu Use the Down ADJ arrow to highlight Analog ModeAlso turn closed captions on To highlight the Caption menuTo highlight the Caption menu ServiceUse the D / E / F / G ADJ buttons to customize each Option Font Size, Font Style, Foreground Color etcAdjust the speaker balance for optimum sound quality Set up the audio options for the end userSound Menu OK Enter buttonYou can set digital audio language Using External SpeakersPicture Menu Tings for the options. When finished, press the OKUse the F / G ADJ buttons to choose Manual and use Up/Down/Left/Right arrow buttons to set your own setUser can choose preset formats for the picture Program package Managing the Channel BanksChannel Bank Number Display Inactive TV Display Channel BankBasic Extend Examples of typical channel banks chars filledOther = Active = Delete100 Channel Number PurposeChannel Number 101 102 103 104 110 111 112 113 114 115Typical Installer Menu G E 4 Commercial Mode SetupIf batteries are removed, the Clone Clock time will be lost Cloning Connections/Learning SetupTurn to the next page to continue Cloning Setup Set the Clock Optional Clone Programmer Learning SetupLearn Setup from Master L20V54S Disconnect L20V54S Power for 15 Seconds Cloning Connections / Teaching SetupTeach Master L20V54S’s Setup to the target Accessing the Installer’s Menu Installer MenuUsing the Installer’s Menu Installer Menu Items 000 throughCH not Avble Installer Menu Items 035 throughInstaller Sequence Detailed Descriptions of Installer Menu ItemsScan Mode Mute DisableSleep Timer Feature LevelAUX Status Detailed Descriptions of Installer Menu ItemsQuick Shutoff Atsc BandAtsc Tune Mode Reference TV Features / Menus that can be ClonedG E 5 Start Minor ChannelTo Do Channel Editing/Labeling, proceed as follows Adding Channel Icons and Labels in the 2-5-4 + Menu ModeChanging/Adding Channel Labels on Master TV Changing Source Labels on Master TVDetailed Instructions Reference Detailed Information For Making a Master TVReference Software Version Check Procedure to Check Software VersionSome quick and easy tips to resolving problems L20V54S Aux Input Configuration / TroubleshootingSymptoms Possible Causes Possible Solutions Software ProblemsTroubleshooting Clone Programmer Troubleshooting Reference Cloning Procedure TroubleshootingReset Clone After Static Shock Controller Quick Check Clone Troubleshooting Flow ChartTV Operation Check OHM RF Cable Glossary of TermsQuick Setup Guide For Integrated Master TVs Installer Quick Setup GuideSee table of contents for more information G E 6G E 6 G E 6 G E 6 Copyright 2007 LG Electronics U.S.A., Inc For Customer Support/Service Please callLG’S Responsibility OWNER’S Responsibility
Top Page Image Contents