Installer Menu
Detailed Descriptions of Installer Menu Items
039 - REAR AUX EN. (Rear Aux Enable)
Set to 1 to enable display panel rear AUX (Video 1) input. Set to 0 to disable display panel rear AUX (Video 1) input.
046 - STRT AUX SRCE (Start Aux Source)
Sets the starting AUX source. |
| |
Start source if start channel =0 |
| |
1 = Video1 | 3 = HDMI 1 | 255 = Last Aux |
047 - AUX STATUS
Set to 1 for M.P.I. AUX source to be reported as a channel number instead of channel 0. Set to 0 to disable AUX identification change. Controls M.P.I. status channel response for AUX inputs.
053 - DIS. CH-TIME (Disable Channel-Time)
Set to 1 to disable the
Set to 0 to enable the
069 - EN.
070 - FOR.
Set according to Color Chart. |
|
| |||
0 | = Black | 3 | = Yellow | 6 | = Cyan |
1 | = Red | 4 | = Blue | 7 | = White |
2 | = Green | 5 | = Violet |
|
|
*Note: If foreground and background colors are the same, menu background is transparent.
071 - BCK.
Set according to Color Chart. |
|
| |||
0 | = Black | 3 | = Yellow | 6 | = Cyan |
1 | = Red | 4 | = Blue | 7 | = White |
2 | = Green | 5 | = Violet |
|
|
*Note: If foreground and background colors are the same, menu background is transparent.
073 - CH NOT AVBLE (Channel Not Available)
If set to 1 and item 028 CHANNEL OVERRIDE is set to 0, “NOT AVAILABLE” message is displayed when directly accessing a channel not in the channel scan list available in memory.
075 - REVERT CH (Revert to Start Channel)
If set to 1 and loss of M.P.I. communication occurs, TV automatically tunes to the specified Start Channel.
077 - QUICK SHUTOFF
Allows TV power off to be controlled by the pillow speaker channel selection button. User would press and hold button down for time required to have TV turn off. Value Range 0 ~ 17, each number represents 1/2 second. For example, if set to 4, TV would turn off if user held speaker channel button down for 2 seconds.
078 - UPN MSB (UPN Most Significant Byte)
User programmable number, most significant byte readable by M.P.I. command.
*Note: Not linked to serial number.
079 - UPN MSB-1 (UPN Most Significant Byte-1)
User programmable number, most significant
080 - UPN MSB-2 (UPN Most Significant Byte-2)
User programmable number, most significant
081 - UPN LSB (UPN Least Significant Byte)
User programmable number, least significant byte readable by M.P.I. command. Not linked to serial number.
082 - CHKSM ERROR (Checksum Error) Enforces rigid M.P.I. checksum validation. Set to 1 for validation.
Set to 0 to disable (does not check checksum on M.P.I. async port). SPI is always checked.
083 - HANDSHK TIME (Handshake Time)
Adds an additional delay to the handshake time which is 64 msec, thus relaxing M.P.I. timing requirements to be compatible with PC based Windows controlled systems, range is 0 - 5.
(Timeout = 25.5MS + [25.5 MS* Handshake time]).
084 - PERMANENT BLK (Permanent Block)
Allows Lock (Parental Control) blocking schemes to be permanent by disabling the blocking hours function.
Set to 1 to install Parental Control restrictions permanently. Set to 0 for
088 - EN NOISE MUTE (Enable Noise Mute) If set to 1, audio mutes if no signal is present.
090 - KEY LOCK
If set to 1, display panel keyboard is locked out, not available to end user. IR receiver remains functional.
094 - SAP MENU EN (2nd Audio Program) Set to 1 to enable SAP feature, if available. Set to 0 to disable SAP feature.
096 - DEF. ASP. RATIO (Default Aspect Ratio)
Selects default aspect ratio at power up, see settings below.
Set to 0 for set by program.
Set to 1 for 4:3.
Set to 2 for 16:9 (Factory Default).
Set to 4 for Zoom 1
Set to 5 for Zoom 2
102 - ATSC BAND
Sets up TV to receive different types of incoming signals: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC, 4=Same as NTSC.
(Continued on next page)