OPERATION
Operation of a Plug ’N Power system is simple, but be sure that you have a complete chart of your system close by so you know exactly what you are controlling. See the “Plug ’N Power System Chart” on Page 24.
Note: Each switch on your controller performs two functions
—ON or OFF, BRIGHT or DIM, and so on. These functions are clearly marked. Pressing the top of a rocker switch acti- vates one function and pressing the bottom activates anoth- er. When you press a button, the transmit indicator lights, indicating that a signal has been sent.
CONTROLLING MODULES BY UNIT CODES
You can control any module or group of modules that you set for a particular unit code. Of course, all of the modules must be set to the same house code as the controller. (See “House Codes” on Page 5.)
14