Radio Shack 61-2677C owner manual Unit Codes

Page 6

61-2677CD.fm Page 6 Tuesday, July 6, 1999 11:05 AM

UNIT CODES

1

15

13

11

9

In each Plug ’N Power system, you can

3operate up to 16 different modules or groups of modules. Set UNIT CODE to the

5desired code (116). The controller lets

7you independently control each group of modules that you set to the same unit code.

The Mini Remote Control Center is intended for small Plug ’N Power systems and does not provide independent control of all 16 unit codes. You can use it to independently control only unit codes 1 through 8. (The Mini Controller’s ALL LIGHTS ON and ALL UNITS OFF commands affect modules with unit codes 116. (See “Operation” on Page 14.) If you need independent control of more than eight groups of mod- ules, we suggest our 16-Button Controller, available at your local RadioShack store.

6

Image 6
Contents Mini Remote Control Center Introduction Contents Preparation House Codes On the controller and all the modules itUnit Codes Installation Setting UP the Control CenterSetting UP the Modules 61-2677CD.fm Page 8 Tuesday, July 6, 1999 1105 AM Command 61-2677CD.fm Page 10 Tuesday, July 6, 1999 1105 AM 61-2677CD.fm Page 11 Tuesday, July 6, 1999 1105 AM Setting the MODULE’S Codes Connecting Lights or Appliances to Modules Operation Controlling Modules by Unit CodesTurning on ALL Lights Turning OFF ALL Units Dimming Lights Manual Control of Lights and Appliances Power Interruptions Intercom InterferenceSafety Precautions 61-2677CD.fm Page 21 Tuesday, July 6, 1999 1105 AM Troubleshooting Problem Remedies61-2677CD.fm Page 23 Tuesday, July 6, 1999 1105 AM Plug ’N Power System Chart Care 61-2677CD.fm Page 26 Tuesday, July 6, 1999 1105 AM 61-2677CD.fm Page 27 Tuesday, July 6, 1999 1105 AM 07A99