Radio Shack 61-2677C owner manual Manual Control of Lights and Appliances

Page 18

61-2677CD.fm Page 18 Tuesday, July 6, 1999 11:05 AM

MANUAL CONTROL OF LIGHTS AND APPLIANCES

Even though your lights and appliances are connected to Plug ’N Power modules, you can still turn most of them on and off manually.

For most products, simply turn the power switch off and back on again.

For 3-way lamps, you might have to turn the lamp’s switch several times before the light turns on.

You always have manual control of wall switch modules by simply using their on/off buttons.

You cannot manually turn on instant-on TVs that are connected to Plug ’N Power modules.

18

Image 18
Contents Mini Remote Control Center Introduction Contents Preparation House Codes On the controller and all the modules itUnit Codes Installation Setting UP the Control CenterSetting UP the Modules 61-2677CD.fm Page 8 Tuesday, July 6, 1999 1105 AM Command 61-2677CD.fm Page 10 Tuesday, July 6, 1999 1105 AM 61-2677CD.fm Page 11 Tuesday, July 6, 1999 1105 AM Setting the MODULE’S Codes Connecting Lights or Appliances to Modules Operation Controlling Modules by Unit CodesTurning on ALL Lights Turning OFF ALL Units Dimming Lights Manual Control of Lights and Appliances Power Interruptions Intercom InterferenceSafety Precautions 61-2677CD.fm Page 21 Tuesday, July 6, 1999 1105 AM Troubleshooting Problem Remedies61-2677CD.fm Page 23 Tuesday, July 6, 1999 1105 AM Plug ’N Power System Chart Care 61-2677CD.fm Page 26 Tuesday, July 6, 1999 1105 AM 61-2677CD.fm Page 27 Tuesday, July 6, 1999 1105 AM 07A99