TROUBLESHOOTING
If the system’s remote control stops working after you successfully test the control of each device, or if you are unable to get the remote control to work at all, check the following:
•Use manual controls or the original remote control to confirm that your
•Be sure you pressed the device key for the device you want to control.
•Replace the remote control’s batteries.
•If you are using the system’s RF command con- sole, make sure it is plugged in and installed in the same room as the IR remote controlled devices you want to operate. Be sure to point the RF command console at the devices you want to control.
•If some buttons do not function for your device, you might be able to search for a better device code.
If you are still unable to determine the problem, call our nationwide Universal Remote Control Hotline at
Need help? Call 1-800-950-7044!
50